Abstract:In this study, the electrochemical performance and discharge behavior of Mg-Li-Zn-Gd alloys with α-Mg and β-Li-based anode material are investigated, with the aim to improve the anode performance of Mg-air batteries. The experimental anode alloys with detailed Mg-8Li-xZn-yGd (x = 1, 2, 3; y = 1, 2, 3 wt.%) components are prepared, and extrusion deformation is carried out on these alloys. Simultaneously, scanning electron microscope (SEM), X-ray diffractometer (XRD), electrochemical workstation, and constant current discharge systems are applied for microstructure characterization, corrosion, and discharge performance testing. The results show that the experimental alloys are composed of an α-Mg and β-Li dual matrix, with W-Mg3Gd2Zn3, Mg3Gd, and MgLiZn second phases. Meanwhile, extrusion deformation promotes the recrystallization process through the particle-induced nucleation mechanism. The corrosion resistance is improved with the increasing Zn/Gd ratio, and the extruded Mg-8Li-2Zn-1Gd (LZG821) alloy exhibits the optimum corrosion resistance, with a corrosion rate of 0.493 mm·year−1. In addition, the extruded Mg-8Li-1Zn-1Gd (LZG811) alloy has the optimal discharge performance, with a discharge specific capacity of 1371.04 mA·g−1 at a current density of 40 mA∙cm−2, and its anode efficiency reaches nearly 70%. The poorer discharge properties of the Mg-8Li-2Zn-1Gd (LZG821) and Mg-8Li-2Zn-3Gd (LZG823) alloys are attributed to their refined grains, which could bring severe intergranular corrosion while increasing the grain boundary density.

Hypoeutectic Mg–Zn binary alloys as anode materials for magnesium-air batteries

Achieving Ultrahigh Anodic Efficiency via Single-Phase Design of Mg–Zn Alloy Anode for Mg–Air Batteries

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries

Effects of trace amounts of Sn, Ca, and Cu on the electrochemical properties and discharge performance of Mg-2Zn-1Gd-0.5Zr as an anode for Mg-air battery

Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium–air batteries

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy

Multi-elemental Synergistic Optimization of Mg-Ge-In-Zn as a Promising Anode for Primary Mg-Air Batteries

Discharge Properties and Electrochemical Behaviors of Mg-Zn-xSr Magnesium Anodes for Mg–Air Batteries

Magnesium–Air Battery with Increased Power Using Commercial Alloy Anodes

The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery

Linking the discharge behavior and microstructure of ternary Mg–Ca–Zn alloy anodes for magnesium-air cells

High Anodic-Efficiency and Energy-Density Magnesium-Air Battery with Modified AZ31 Anode

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Discharge and corrosion behavior of Mg–2Zn–Mn–xY alloys as the anode for Mg-air battery

Constructing dilute Mg-1.0In binary alloy: A pathway to enhanced anode performance in Mg-air battery

Discharge performance of Mg-Y binary alloys as anodes for Mg-air batteries

Dissolution Mechanism of Eutectic and Hypereutectic Mg-Sn Alloy Anodes for Magnesium Rechargeable Batteries

The role of long‐period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg‐Zn‐Y for the primary Mg‐air battery

NaBF4-dimethyl sulfoxide/NaCl-H2O biphasic electrolytes for magnesium–air batteries

Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios