Abstract:In this study, the electrochemical performance and discharge behavior of Mg-Li-Zn-Gd alloys with α-Mg and β-Li-based anode material are investigated, with the aim to improve the anode performance of Mg-air batteries. The experimental anode alloys with detailed Mg-8Li-xZn-yGd (x = 1, 2, 3; y = 1, 2, 3 wt.%) components are prepared, and extrusion deformation is carried out on these alloys. Simultaneously, scanning electron microscope (SEM), X-ray diffractometer (XRD), electrochemical workstation, and constant current discharge systems are applied for microstructure characterization, corrosion, and discharge performance testing. The results show that the experimental alloys are composed of an α-Mg and β-Li dual matrix, with W-Mg3Gd2Zn3, Mg3Gd, and MgLiZn second phases. Meanwhile, extrusion deformation promotes the recrystallization process through the particle-induced nucleation mechanism. The corrosion resistance is improved with the increasing Zn/Gd ratio, and the extruded Mg-8Li-2Zn-1Gd (LZG821) alloy exhibits the optimum corrosion resistance, with a corrosion rate of 0.493 mm·year−1. In addition, the extruded Mg-8Li-1Zn-1Gd (LZG811) alloy has the optimal discharge performance, with a discharge specific capacity of 1371.04 mA·g−1 at a current density of 40 mA∙cm−2, and its anode efficiency reaches nearly 70%. The poorer discharge properties of the Mg-8Li-2Zn-1Gd (LZG821) and Mg-8Li-2Zn-3Gd (LZG823) alloys are attributed to their refined grains, which could bring severe intergranular corrosion while increasing the grain boundary density.

Achieving Ultrahigh Anodic Efficiency via Single-Phase Design of Mg–Zn Alloy Anode for Mg–Air Batteries

Hypoeutectic Mg–Zn binary alloys as anode materials for magnesium-air batteries

Ultra-high-purity Mg-Ge anodes enable a long-lasting, high energy-density Mg-air battery

High Anodic-Efficiency and Energy-Density Magnesium-Air Battery with Modified AZ31 Anode

In Situ Interfacial Passivation in Aqueous Electrolyte for Mg-Air Batteries with High Anode Utilization and Specific Capacity

High-energy-capacity metal-air battery based on a magnetron-sputtered Mg–Al anode

A Chloride-Free Electrolyte to Suppress the Anodic Hydrogen Evolution Corrosion of Magnesium Anode in Aqueous Magnesium Air Batteries

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy

Magnesium–Air Battery with Increased Power Using Commercial Alloy Anodes

A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries

Synergistic Mixture of Electrolyte Additives: A Route to a High-Efficiency Mg-Air Battery

Constructing dilute Mg-1.0In binary alloy: A pathway to enhanced anode performance in Mg-air battery

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

NaBF4-dimethyl sulfoxide/NaCl-H2O biphasic electrolytes for magnesium–air batteries

High-Energy-Density Magnesium-Air Battery Based on Dual-Layer Gel Electrolyte

The role of long‐period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg‐Zn‐Y for the primary Mg‐air battery

Utilizing an electrolyte additive to modulate interfaces and enhance anode discharge performance in aqueous magnesium–air batteries

A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery

Micro-Alloyed Mg-Al-Mn-La Anode for Mg-Air Batteries

An ultrahigh energy density Mg–air battery with organic acid–solid anolyte biphasic electrolytes

Evading the efficiency-voltage trade-off in magnesium air battery via a novel active learning framework