Abstract:In this study, the electrochemical performance and discharge behavior of Mg-Li-Zn-Gd alloys with α-Mg and β-Li-based anode material are investigated, with the aim to improve the anode performance of Mg-air batteries. The experimental anode alloys with detailed Mg-8Li-xZn-yGd (x = 1, 2, 3; y = 1, 2, 3 wt.%) components are prepared, and extrusion deformation is carried out on these alloys. Simultaneously, scanning electron microscope (SEM), X-ray diffractometer (XRD), electrochemical workstation, and constant current discharge systems are applied for microstructure characterization, corrosion, and discharge performance testing. The results show that the experimental alloys are composed of an α-Mg and β-Li dual matrix, with W-Mg3Gd2Zn3, Mg3Gd, and MgLiZn second phases. Meanwhile, extrusion deformation promotes the recrystallization process through the particle-induced nucleation mechanism. The corrosion resistance is improved with the increasing Zn/Gd ratio, and the extruded Mg-8Li-2Zn-1Gd (LZG821) alloy exhibits the optimum corrosion resistance, with a corrosion rate of 0.493 mm·year−1. In addition, the extruded Mg-8Li-1Zn-1Gd (LZG811) alloy has the optimal discharge performance, with a discharge specific capacity of 1371.04 mA·g−1 at a current density of 40 mA∙cm−2, and its anode efficiency reaches nearly 70%. The poorer discharge properties of the Mg-8Li-2Zn-1Gd (LZG821) and Mg-8Li-2Zn-3Gd (LZG823) alloys are attributed to their refined grains, which could bring severe intergranular corrosion while increasing the grain boundary density.

A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery

Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution

Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery

Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium–air batteries

A micro-alloyed Mg-Zn-Ge alloy as promising anode for primary Mg-air batteries

High Anodic-Efficiency and Energy-Density Magnesium-Air Battery with Modified AZ31 Anode

The Dependence of Electrochemical Behavior and Discharge Performance on the Zn/Gd Ratio of Mg-Li-Zn-Gd Anodes for Mg-Air Batteries

The semi-continuous (Mg,Al) 2 Ca second phase on Mg-Al-Ca-Mn alloys as an efficient anti-corrosion anode for Mg-air batteries

Achieving Ultrahigh Anodic Efficiency via Single-Phase Design of Mg–Zn Alloy Anode for Mg–Air Batteries

Discharge and corrosion behavior of Mg–2Zn–Mn–xY alloys as the anode for Mg-air battery

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg 41 Nd 5 in Mg-4Li-3Nd-0.2Zn alloy

Constructing dilute Mg-1.0In binary alloy: A pathway to enhanced anode performance in Mg-air battery

Linking the discharge behavior and microstructure of ternary Mg–Ca–Zn alloy anodes for magnesium-air cells

Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios

Hypoeutectic Mg–Zn binary alloys as anode materials for magnesium-air batteries

Improved Discharge Performance of AZ72-0.05La Alloy Anode via Refining Mg17Al12 Phase

In Situ Interfacial Passivation in Aqueous Electrolyte for Mg-Air Batteries with High Anode Utilization and Specific Capacity

Zn–Sn Alloy Anode with Repressible Dendrite Grown and Meliorative Corrosion Resistance for Zn-air Battery

A Chloride-Free Electrolyte to Suppress the Anodic Hydrogen Evolution Corrosion of Magnesium Anode in Aqueous Magnesium Air Batteries

Effects of trace amounts of Sn, Ca, and Cu on the electrochemical properties and discharge performance of Mg-2Zn-1Gd-0.5Zr as an anode for Mg-air battery