Abstract:Electrowinning of zinc from alkaline solutions is a promising technology which can directly produce metallic zinc powder from the treatment of zinc-containing ores and wastes. Fine zinc powder is of great interest in a variety of industries, such as paints, battery electrodes and cementation. This study investigated the effect of Poly (ethylene glycol) (12) tridecyl ether (PTE) on the dendritic growth and the particle size distribution of Zn electrodeposits in alkaline solutions that have similar content as used in industry. The dendritic growth of Zn electrodeposits was studied using current-time technique and scanning electron microscopy (SEM) while the purity was analyzed by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The particle size distribution was investigated by sieve analysis, laser particle size analyzer and cathodic potentiodynamic polarization, respectively. The results suggest that the presence of PTE can effectively inhibit the dendritic growth of Zn electrodeposits, where small, flat and layer-less dendrites with high Zn purity (99.34 wt.%) were electrodeposited. The data from the sieve analysis shows that 77.16 wt.% of electrodeposits can pass the sieve up to 150 μm in size after the addition of PTE. This was significantly higher than from the additive-free electrolyte (19.21 wt.%). The cathodic polarization curves suggest that, after the addition of PTE, more negative overpotential of Zn electrodeposition was observed, which increased the nucleation rate of Zn nuclei and more fine zinc particles were produced. These results indicate that PTE is an effective additive for the particle size refinement of Zn electrodeposits in alkaline zincate solutions.

The effects of polyethylene glycol (PEG) as an electrolyte additive on the corrosion behavior and electrochemical performances of pure aluminum in an alkaline zincate solution

Influences of Zinc Oxide and an Organic Additive on the Electrochemical Behavior of Pure Aluminum in an Alkaline Solution

Effects of Electrolyte Additives on Behavior of Al-In-Ga-Pb Alloy Anode

Optimizing Molecular Weight of Polyethylene Glycol as an Additive for Stabilizing Zn Metal Anode in Aqueous Electrolyte

Synergistic Effect of Polyethylene Glycol 600 and Polysorbate 20 on Corrosion Inhibition of Zinc Anode in Alkaline Batteries

Investigation on Synergism of Composite Additives for Zinc Corrosion Inhibition in Alkaline Solution

The Influences of Polyoxyethylene Ether on the Corroision Behaviors of Zinc and Zn-In Alloy in Alkaline Solutions

Composite Corrosion Inhibitors for Secondary Alkaline Zinc Anodes

The Corrosion and Electrochemical Behavior of Pure Aluminum in Additive‐containing Alkaline Methanol–water Mixed Solutions

Particle Size Refinement of Zn Electrodeposits in Alkaline Zincate Solutions with Poly (ethylene Glycol) (12) Tridecyl Ether. Part II

Effect of Electrolyte Additives on Performance of Plasma Electrolytic Oxidation Films Formed on Magnesium Alloy AZ91D

Influence of polyethylene glycol on cathode plasma electrolytic depositing Al2O3 anti-oxidation coatings

Effect of Additives on the Properties of Plasma Electrolytic Oxidation Coatings Formed on AM50 Magnesium Alloy in Electrolytes Containing K2ZrF6

Combined Corrosion Inhibitors for Secondary Alkaline Zinc Electrodes

Study on suppressing gas evolution of alkaline Zn/MnO2 battery by polyethylene glycol

Electrochemical Properties of Aluminum Anode in Alkaline Organic Solution

Effect of Polyethylene Glycol on Preparation of Magnesium Hydroxide by Electrodeposition.

Effects of Additives in the Alkaline Electrolyte on Anode Behavior of Aluminum

Effect of additives on structure and corrosion resistance of plasma electrolytic oxidation coatings on AZ91D magnesium alloy in phosphate based electrolyte

Stabilizing Zinc Anode Reactions by Polyethylene Oxide Polymer in Mild Aqueous Electrolytes

Effects of Additives on the Electrochemical Behaviors of Zn Electrode in Alkaline Solutions