Abstract:The effect of different concentrations of sodium stannate (Na2SnO3) as the electrolyte additive in 0.7 mol L-1 NaCl electrolyte solution on the electrochemical performance of the Mg-8Li-1Y alloy electrode prepared by the vacuum induction melting method have been investigated by means of potentiostatic currenttime, potentiodynamic polarization, and electrochemical impedance spectroscopy measurements as well as scanning electron microscopy. The performances of the magnesium- hydrogen peroxide (Mg- H2O2) semi- fuel cells with the Mg-8Li-1Y alloy as the anode were also determined. From the study, it has been found that the corrosion potential of the Mg-8Li-1Y electrode is slightly shifted to the negative direction and the corrosion current density is markedly decreased when different concentrations of Na2SnO3 are added to a 0.7 mol L-1 NaCl electrolyte solution. The electrochemical impedance spectroscopy measurements show that the polarization resistance of the Mg-8Li-1Y electrode reduces in the following order with different concentrations of Na2SnO3: 0.20 mmol L-1 > 0.00 mmol L-1 > 0.05 mmol L-1 > 0.10 mmol L-1 > 0.30 mmol L-1. The electrochemical performance, illustrated by potentiostatic current-time curves, of Mg-8Li-1Y electrode in 0.7 mol L-1 NaCl electrolyte solution containing 0.30 mmol L-1 Na2SnO3 is better than that in 0.7 mol L-1 NaCl electrolyte solution containing Na2SnO3 in other concentrations. The addition of Na2SnO3 to the NaCl electrolyte solution loosens the product film and changes the size and thickness of the micro-clumps of the oxidation products. The Mg-H2O2 semi-fuel cell with the Mg-8Li-1Y anode in 0.7 mol L-1 NaCl solution containing 0.30 mmol L-1 Na2SnO3 presents a maximum power density of 112 mW cm(-2) at room temperature.

Effects of Solid-Solute Magnesium and Stannate Ion on the Electrochemical Characteristics of a High-Performance Aluminum Anode/electrolyte System

Exploring the Effect of Magnesium Content on the Electrochemical Performance of Aluminum Anodes in Alkaline Batteries

Effect of Magnesium on Discharge Behavior of Al-Sn-Ca-Mg Anodes for Al-air Batteries

Revealing the Effect of Aluminum Content on the Electrochemical Performance of Magnesium Anodes for Aqueous Batteries

Effects of Alloying Elements on Electrochemical Performance of Aluminum Anodes

Effects of Al and Sn on Electrochemical Properties of Mg-6%Al-1%Sn （mass Fraction） Magnesium Alloy As Anode in 3.5%nacl Solution

The Effects of Surface Treatment and Stannate As an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol–water Solution

Effects of Al and Sn on Microstructure, Corrosion Behavior and Electrochemical Performance of Mg–Al-based Anodes for Magnesium-Air Batteries

Effect of Sn on Microstructure and Electrochemical Properties of Mg Alloy Anode Materials

The effect of sodium stannate as the electrolyte additive on the electrochemical performance of the Mg–8Li–1Y electrode in NaCl solution

Composition Optimization and Electrochemical Properties of Mg-Al-Sn-Mn Alloy Anode for Mg-air Batteries

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Performance of an Al–0.08Sn–0.08Ga–xMg Alloy As an Anode for Al–air Batteries in Alkaline Electrolytes

Electrochemical Performance of Melt-Spinning Al–Mg–Sn Based Anode Alloys

Effect of Microstructure Evolution on the Discharge Characteristics of Al-Mg-Sn-based Anodes for Al-air Batteries

Corrosion Behavior and Discharge Properties of Al-doped Mg–Sn Alloys for High Performance Mg-air Batteries

Influence of magnesium contents on microstructure and electrochemistry behaviors of aluminum alloys for sacrificial anodes

Performance of Anodes with Proper Active Metal Elements Added to the Al-0.16wt%In in Alkaline Electrolyte for Al-Air Batteries

The Electrochemical Behaviors of Mg–8Li–3Al–0.5Zn and Mg–8Li–3Al–1.0Zn in Sodium Chloride Solution

Effects of Heat Treatment on the Discharge Behavior of Mg-6wt.%Al-1wt.%Sn Alloy As Anode for Magnesium-Air Batteries

Effects of Microstructure on the Electrochemical Discharge Behavior of Mg-6wt%Al-1wt%Sn Alloy As Anode for Mg-air Primary Battery