Abstract:The dendrite issue and the associated cell degradation problems have proved to be a key challenge to the practical application of alkali metal anodes.1,2 We present a simple yet efficient approach to fabricate amalgam anodes (Figure 1a) that afford long-term stability cycling at practical current densities and capacities.3 The amalgam layer allows fast electron transfer as well as Li/Na/K migration at the electrolyte-electrode interphase, which significantly promote the cycling performance. For example, Protected Li electrodes exhibit stable cycling over 750 hrs at high plating current and capacity of 8 mA cm-2 and 8 mAh cm-2 in symmetric cells (Figure 1b). Coupled with high-loading cathodes (~12 mg cm-2) such as LiFePO4 (LFP) and LiNi0.6Co0.2Mn0.2O2 (NCM), the prototype full cells also demonstrate much improved rate and long-term cycling stability (Figure 1c). In-situ optical microscopy analyses confirm the dendrite nucleation and growth can be remarkably suppressed with the Li-Hg protected anodes (Figure 1d). These promising results provide new perspectives on the regulation of sodium electrodeposition and hence the elimination of the dendritic morphology for the practical development of alkali metal batteries. References: 1. X.-B. Cheng, R. Zhang, C.-Z. Zhao, and Q. Zhang, Chem. Rev., 117, 10403–10473 (2017). 2. R. Weber, M. Genovese, A. J. Louli, S. Hames, C. Martin, I. G. Hill, and J. R. Dahn, Nat. Energy, 4, 683-689 (2019). 3. G. He, Q. Li, Y. Shen, and Y. Ding, Angew. Chem. Int. Ed., DOI: 10.1002/anie.201911800 (2019). Figure 1. a) The preparation process of Li-Hg protected anodes; b) Cycling performance of Li-Hg protected anodes and pristine anodes in symmetric cells; c) Cycling performance of Li-Hg protected anodes and pristine anodes in full cells with high-loading LFP and NCM cathodes; d) In-situ optical analyses showing the different Li deposition behaviors on Li-Hg protected and pristine anodes. Figure 1

Enhanced Cycling Stability of Amorphous MgNi-Based Alloy Electrodes through Corrosion Prevention by Incorporating Al2(SO4)3·18H2O into the Electrolyte

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Using tetramethylammonium hydroxide electrolyte to inhibit corrosion of Mg-based amorphous alloy anodes: A route for promotion energy density of Ni-MH battery

Promoting the cycling stability of amorphous MgNi-based alloy electrodes by mitigating hydrogen-induced crystallization

The Reduction of Cycling Capacity Degradation of Mg–Ni-based Electrode Alloys by Fe Substitution

Aluminum-doping-based Method for the Improvement of the Cycle Life of Cobalt–nickel Hydroxides for Nickel–zinc Batteries

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Cycling Stability of La-Mg-Ni-Co Type Hydride Electrode with Al

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Corrosion Mechanism of Mechanically Alloyed Mg50ni50 and Mg45cu5ni50 Alloys

Improving hydrogen-induced crystallization and electrochemical hydrogen storage properties of MgNi amorphous alloy with CoB addition

Hydrogenation and Crystallization of Amorphous Phase: A New Mechanism for the Electrochemical Capacity and Its Decay in Milled Mg-Ni Alloys

Enhanced cycling durability of A 5 B 19 -type single-phase La–Mg–Ni-based hydrogen storage alloy via turning the superlattice structure by mg

Solid-Solution-Based Li-Mg Alloy for Highly Stable Lithium Metal Anode

Electrolyte‐Salts Regulated Hydrogen‐Bonding Configuration and Interphase Formation Achieving Highly Stable Anode for Rechargeable Aqueous Sodium‐Ion Batteries

Amalgam Protection for Alkali Metal Anodes

Cycling durability and degradation behavior of La–Mg–Ni–Co-type metal hydride electrodes

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Building Organic–Inorganic Robust Interphases from Deep Eutectic Solution for Highly Stable Mg Metal Anode in Conventional Electrolyte

A Hydridoaluminate Additive Producing a Protective Coating on Ni‐Rich Cathode Materials in Lithium‐Ion Batteries

Enhancing Reversibility and Stability of Mg Metal Anodes: High-Exposure (002) Facets and Nanosheet Arrays for Superior Mg Plating/Stripping