Abstract:Through a tailored melt‐annealing procedure, single‐crystalline (110)‐oriented Li0.9Mg0.1 (denoted as LiMg(110)) alloy anode is obtained to exhibit enhanced Li atoms diffusion kinetics and behavior. As a result, the all‐solid‐state battery with LiNi0.8Co0.1Mn0.1O2 cathode, LiMg(110) anode, and Li3InCl6 exhibit long‐cycle stability over 160 cycles with 80% capacity retention, showing enormous potential of crystallographic regulatory strategy. All solid state lithium metal batteries (ASSLMBs) with enhanced energy density has driven the exploration of Li‐alloy anodes such as Li‐Mg alloy owing to its solid‐solution structure and high theoretical specific capacity. But the Li atom diffusion limitation on Li‐Mg electrode surface further leads to sluggish atoms transport dynamics. Herein, single‐crystalline (110)‐oriented Li0.9Mg0.1 (denoted as LiMg(110)) anode is obtained by a tailored melt‐annealing procedure to tackle the above issues. Theoretical analyses and experimental results demonstrate that the crystallographic structural (110) orientation of LiMg anode can facilitate Li atom diffusion and guarantee the electrode stability during deep cycling. As a result, the LiMg(110) electrode exhibits longer cycle life with lower overpotential than polycrystalline LiMg at high current densities and areal capacities in symmetric cells. A critical current density (CCD) at the forefront of 2.5 mA cm−2 is achieved in Li3InCl6 (LIC) solid‐state system. The ASSLMB with high areal capacity (3.8 mAh cm−2), high current density (0.76 mA cm−2), and low negative/positive capacity N/P ratio (2.14) achieves exceptional cyclability over 160 cycles. The outcomes highlight a promising crystallographic regulation strategy toward practical applications of high‐performance lithium metal batteries.

Solid-Solution-Based Li-Mg Alloy for Highly Stable Lithium Metal Anode

An Ultrastable Lithium Metal Anode Enabled by Designed Metal Fluoride Spansules

Dendrite‐Free Li‐Metal Anode Enabled by Dendritic Structure

Regulating Li transport in Li-magnesium alloy for dendrite free Li metal anode

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Long-term stable Li metal anode enabled by strengthened and protected lithiophilic LiZn alloys

Solid-solution based metal alloy phase for highly reversible lithium metal anode.

A Novel 3D Li/Li9Al4/Li‐Mg Alloy Anode for Superior Lithium Metal Batteries

Stable Lithium Metal Anode Enabled by a Lithiophilic and Electron/Ion Conductive Framework

Dynamic Concentration of Alloying Element on Anode Surface Enabling Cycle‐Stable Li Metal Batteries

Single‐Crystalline LiMg Alloy Anode for Deep Cycling All Solid State Lithium Metal Batteries

Stabilizing Lithium Metal Anode by Molecular Beam Epitaxy Grown Uniform and Ultrathin Bismuth Film

Stable lithium metal anode enabled by lithium metal partial alloying

Stabilized and Almost Dendrite-Free Li Metal Anodes by In Situ Construction of a Composite Protective Layer for Li Metal Batteries

Homogenizing the Li-ion flux by multi-element alloying modified for 3D dendrite-free lithium anode

Constructing a High‐Strength Solid Electrolyte Layer by In Vivo Alloying with Aluminum for an Ultrahigh‐Rate Lithium Metal Anode

Constructing stable lithium metal anodes using a lithium adsorbent with a high Mn3+/Mn4+ ratio

Enhanced Stability of Li Metal Anodes by Synergetic Control of Nucleation and the Solid Electrolyte Interphase

Enabling Stable Lithium Metal Anode via 3D Inorganic Skeleton with Superlithiophilic Interphase

A conductive-dielectric gradient framework for stable lithium metal anode

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode