Abstract:Solid-state batteries (SSBs) can offer a paradigm shift in battery safety and energy density. Yet, the promise hinges on the ability to integrate high-performance electrodes with state-of-the-art solid electrolytes. For example, lithium (Li) metal, the most energy-dense anode candidate suffers from severe interfacial chemomechanical issues that lead to cell failure. Li alloys of In/Sn are attractive alternatives, but their exploration has mostly been limited to the low capacity (low Li content) and In-rich LixIn (x ≤ 0.5) systems. Here, the fundamental electro-chemo-mechanical behavior of Li–In and Li–Sn alloys of varied Li stoichiometries is unraveled in sulfide electrolyte-based SSBs. The intermetallic electrodes developed through a controlled synthesis and fabrication technique display impressive (electro)chemical stability with Li6PS5Cl as the solid electrolyte and maintain nearly perfect interfacial contact during the electrochemical Li insertion/deinsertion under an optimal stack pressure. Their intriguing variation in the Li migration barrier with composition and its influence on the observed Li cycling overpotential is revealed through combined computational and electrochemical studies. Stable interfacial chemomechanics of the alloys allow long-term dendrite free Li cycling (>1000 h) at relatively high current densities (1 mA cm–2) and capacities (1 mAh cm–2), as demonstrated for Li13In3 and Li17Sn4, which are more desirable from a capacity and cost consideration compared to the low-Li-content analogues. The presented understanding can guide the development of high-capacity Li–In/Sn alloy anodes for SSBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c01431.Additional experimental details; diffraction pattern of the Li–In and Li–Sn alloys; SEM micrographs of the alloys and the fabricated electrodes; resistance of the SE pellets; stack resistance of A|Li6PS5Cl|A (A = Li, In, Li0.5In, LiIn, Li13In3 Li2Sn5, or Li17Sn4) cells; stripping and plating performance of metallic lithium and long-term stripping and plating performance of cells assembled with Li0.5In and LiIn; computational details; a list of the compound studied with modeling, their provenance, and the definition of the formation energy; and the additional Li migration barriers in selected alloys (PDF)This article has not yet been cited by other publications.

Single‐Crystalline LiMg Alloy Anode for Deep Cycling All Solid State Lithium Metal Batteries

Solid-Solution-Based Li-Mg Alloy for Highly Stable Lithium Metal Anode

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Dual modified NCMA cathode with enhanced interface stability enabled high-performance sulfide-based all-solid-state lithium battery

Dynamic Concentration of Alloying Element on Anode Surface Enabling Cycle‐Stable Li Metal Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

A Novel 3D Li/Li9Al4/Li‐Mg Alloy Anode for Superior Lithium Metal Batteries

In situ Triggered Rich‐LiF/Mg Multifunctional Passivation Layer for Modifying the Anode Interface of All‐Solid‐State Lithium Metal Batteries

A Triple‐Gradient Host for Long Cycling Lithium Metal Anodes at Ultrahigh Current Density

Surface-modified and sulfide electrolyte-infiltrated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries

Fast Ion Transport in Li‐Rich Alloy Anode for High‐Energy‐Density All Solid‐State Lithium Metal Batteries

Compositional Engineering of Lithium Metal Anode for High‐Performance Garnet‐Type Solid‐State Lithium Battery

Superlithiophilic, Ultrastable, and Ionic‐Conductive Interface Enabled Long Lifespan All‐Solid‐State Lithium‐Metal Batteries under High Mass Loading

Porous Lithiophilic Li–Si Alloy‐Type Interfacial Framework via Self‐Discharge Mechanism for Stable Lithium Metal Anode with Superior Rate

Regulating Li transport in Li-magnesium alloy for dendrite free Li metal anode

Integrated Interface Configuration by In-Situ Interface Chemistry Enabling Uniform Lithium Deposition in All-Solid-state Lithium Metal Batteries

Stable All-Solid-state Lithium Metal Batteries with Li3N-LiF-enriched Interface Induced by Lithium Nitrate Addition

"Win‐Win" Modification of LiCoO2 Enables Stable and Long‐Life Cycling of Sulfide‐Based All Solid‐State Batteries

Favorable Interfacial Chemomechanics Enables Stable Cycling of High-Li-Content Li–In/Sn Anodes in Sulfide Electrolyte-Based Solid-State Batteries

Lithium–Magnesium Alloy as a Stable Anode for Lithium–Sulfur Battery

Stabilizing Interface Between Li10SnP2S12 and Li Metal by Molecular Layer Deposition