Abstract:Superlattice hydrogen storage alloys are one of the most potential candidates for the negative electrode materials of nickel-metal hydride batteries. However, their crystal structure damage and oxidation/corrosion during battery cycling severely deteriorate their cycle life. In this work, we propose a new strategy based on the alloys' structure characteristics analysis and First-principles calculation to enhance their cycling stability. The strategy equalizes the sublattice volumes of [A2B4] and [AB5] by atomic selective occupation and meanwhile increases the alloys' electronegativity. The feasibility of the strategy is validated experimentally by designing a series of single-phase superlattice alloys with simple elemental compositions of La0.75-xGdxMg0.25Ni3.5 (x = 0, 0.05, 0.1, 0.15). It is found that when appropriate amount of Gd is added, the sublattice volumes of [LaMgNi4] and [LaNi5] become equal, so that the alloy maintains a stable crystal structure in the long-term battery cycling. Moreover, the alloys' oxidation/corrosion resistance is enhanced due to the high electronegativity of Gd. The alloys' capacity retention after 100 cycles is improved from 82.1% (La0.75Mg0.25Ni3.5) to 88.2% (La0.60Gd0.15Mg0.25Ni3.5) without sacrificing the maximum discharge capacity, and meanwhile the high rate dischargeability is also increased. The design strategy provides new insights for overcoming the weakness in the cycling stability of superlattice hydrogen storage alloys, thus promoting their practical applications.

Promoting the cycling stability of amorphous MgNi-based alloy electrodes by mitigating hydrogen-induced crystallization

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Influence of Annealing Treatment on Microstructure and Cycling Stability of La-Rich Ml(Nicomnal)(5) Alloy Electrode for Ni/Mh Batteries

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Hydrogenation and Crystallization of Amorphous Phase: A New Mechanism for the Electrochemical Capacity and Its Decay in Milled Mg-Ni Alloys

Improving hydrogen-induced crystallization and electrochemical hydrogen storage properties of MgNi amorphous alloy with CoB addition

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Enhanced Cycling Stability of Amorphous MgNi-Based Alloy Electrodes through Corrosion Prevention by Incorporating Al2(SO4)3·18H2O into the Electrolyte

Reducing the Electrochemical Capacity Decay of Milled Mg–Ni Alloys: the Role of Stabilizing Amorphous Phase by Ti-substitution

The Effects of Partial Substitution of Mn by Cr on the Electrochemical Cycle Life of Ti-Zr-V-Mn-Ni Alloy Electrodes of a Ni/MH Battery

The Reduction of Cycling Capacity Degradation of Mg–Ni-based Electrode Alloys by Fe Substitution

A new strategy for enhancing the cycling stability of superlattice hydrogen storage alloys

Enhanced cycling durability of A 5 B 19 -type single-phase La–Mg–Ni-based hydrogen storage alloy via turning the superlattice structure by mg

Cycling Stability of La-Mg-Ni-Co Type Hydride Electrode with Al

Improvement on cyclic stability of AB 4 -type La–Mg–Ni-based hydrogen storage alloys via merging Y element for nickel-metal hydride batteries

The Relation Between the Discharge Capacity and Cycling Number of Mechanically Alloyed MgxNi100−x Amorphous Electrode Alloys

Improvement of electrochemical cyclic durability of Zr-based AB2 alloy electrodes

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

Electrochemical hydrogen storage properties of La0.95Mg2.05Ni9 alloy prepared by mechanical alloying

Effect of Al Content on Hydrogen Storage Properties of Amorphous Mg1-Xalxni (X=0, 0.1, 0.2, 0.3) Alloy

Electrical cycling characteristics of high-entropy energy storage Mg-Y-Ni-Cu alloys with different degrees of amorphization for Ni-MH batteries