Abstract:The corrosion phenomenon and its economic impacts can hardly be ignored in any application. This study synthesized a quaternary ammonium salt (3) containing hydrophobic dodecyl and electron-rich diallylbenzyl amine moieties to be used in 15 % HCl as a corrosion inhibitor of mild steel. Several techniques, such as 1H and 13C NMR, IR, TGA, and elemental analysis, have been used to characterize inhibitor 3. Popular corrosion measurement techniques, namely weight loss, potentiodynamic polarization techniques, and electrochemical impedance spectroscopy, have been used to determine the efficiency of inhibitor 3. At 303 K and a moderately low concentration of 50 ppm, the quaternary ammonium salt-based inhibitor demonstrated a maximum efficiency of ≈95.0 %. At elevated temperatures of 313, 323, and 333 K, the inhibition efficacy values were recorded as 91.3, 82.8, and 75.0 %, respectively. Adsorption isotherm study revealed that the adsorption of inhibitor 3 followed Langmuir adsorption isotherm. The value of Δ G a d s ° was found to be - 40.19 kJ mol-1, indicating that inhibitor 3 became adsorbed via a mixed physi-chemisorption mechanism. A very high adsorption constant ( K a d s ) of 1.53 × 105 L mol-1 suggested strong adsorption of inhibitor 3. The difference in activation energy ( E a ) value of 42.4 kJ mol-1 between the control and the inhibited solution indicated an efficient adsorption of inhibitor 3. The ability of inhibitor 3 to retard both anodic and cathodic half-cell reactions was proved via open circuit potential and Tafel curves studies. Detailed discussions on the change in corrosion current densities ( i c o r r ), polarization ( R p ) and charge transfer ( R c t ) resistances have been offered to discuss the inhibition efficiency. Water contact angle measurement showed a drastic increase in mild steel surface hydrophobicity following inhibitor 3 adsorption. SEM-EDX and XPS studies confirmed the definitive presence of inhibitor 3 on the mild steel surface. Density functional theory (DFT) studies revealed the frontier molecular orbitals with which the metal surface interacts. A detailed corrosion inhibition mechanism has been offered in the context of adsorption isotherm and DFT studies.

Enhancing the corrosion inhibition performance of Mannich base on mild steel in lactic acid solution through synergistic effect of allicin: Experimental and theoretical study

Synthesis and Corrosion Inhibition Performance of Mannich Bases on Mild Steel in Lactic Acid Media

Experimental and theoretical study on the corrosion inhibition of mild steel by nonanedioic acid derivative in hydrochloric acid solution

Bis-Mannich bases as effective corrosion inhibitors for N80 steel in 15% HCl medium

Effectiveness of an amine-based inhibitor—guanidine for steel in chloride-contaminated concrete

Molecular Dynamic Simulation on the Synergistic Corrosion Inhibition Effect and Mechanism of Quinoline Quaternary Ammonium Salt and L-Methionine

Corrosion inhibition performance and adsorption mechanism of new synthesized symmetrical diarylidenacetone-based inhibitor on C38 steel in 15 % HCl medium: Theoretical insight and experimental validation

Molecular Dynamic Simulation and Experimental Investigation on the Synergistic Mechanism and Synergistic Effect of Oleic Acid Imidazoline and L-Cysteine Corrosion Inhibitors

Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Synergistic Inhibition Properties and Microstructures of Self-Assembled Imidazoline and Phosphate Ester Mixture for Carbon Steel Corrosion in the CO2 Brine Solution

Dopamine modified natural glucomannan as a highly efficient inhibitor for mild steel: Experimental and theoretical methods

Inhibition of mild steel corrosion in 1 M HCl by chondroitin sulfate and its synergistic effect with sodium alginate

Two α-aminophosphonics acids as corrosion inhibitors for carbon steel in 0.5 M HCl: Electrochemical and DFT/MD simulation.

Corrosion inhibition effect of several amino acids on an Al-Zn-Mg-Cu alloy: Electrochemical study, DFT and MD simulation

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Synergistically and sustainably performed inhibitors for galvanised steel against aqueous corrosion

Synthesis, experimental and computational studies on the anti-corrosion performance of substituted Schiff bases of 2-methoxybenzaldehyde for mild steel in HCl medium

An improved protection of alanine for atmospheric corrosion of mild steel using carbon dots-montmorillonite hybrid materials

Concise Cu I -Catalyzed Azide–Alkyne 1,3-Dipolar Cycloaddition Reaction Ligation Remarkably Enhances the Corrosion Inhibitive Potency of Natural Amino Acids for Mild Steel in HCl

Synergism of alkylbenzene sulfonate and cetyltrimethylammonium bromide on corrosion inhibition of carbon steel in CO2 -saturated solutions