Abstract:The corrosion phenomenon and its economic impacts can hardly be ignored in any application. This study synthesized a quaternary ammonium salt (3) containing hydrophobic dodecyl and electron-rich diallylbenzyl amine moieties to be used in 15 % HCl as a corrosion inhibitor of mild steel. Several techniques, such as 1H and 13C NMR, IR, TGA, and elemental analysis, have been used to characterize inhibitor 3. Popular corrosion measurement techniques, namely weight loss, potentiodynamic polarization techniques, and electrochemical impedance spectroscopy, have been used to determine the efficiency of inhibitor 3. At 303 K and a moderately low concentration of 50 ppm, the quaternary ammonium salt-based inhibitor demonstrated a maximum efficiency of ≈95.0 %. At elevated temperatures of 313, 323, and 333 K, the inhibition efficacy values were recorded as 91.3, 82.8, and 75.0 %, respectively. Adsorption isotherm study revealed that the adsorption of inhibitor 3 followed Langmuir adsorption isotherm. The value of Δ G a d s ° was found to be - 40.19 kJ mol-1, indicating that inhibitor 3 became adsorbed via a mixed physi-chemisorption mechanism. A very high adsorption constant ( K a d s ) of 1.53 × 105 L mol-1 suggested strong adsorption of inhibitor 3. The difference in activation energy ( E a ) value of 42.4 kJ mol-1 between the control and the inhibited solution indicated an efficient adsorption of inhibitor 3. The ability of inhibitor 3 to retard both anodic and cathodic half-cell reactions was proved via open circuit potential and Tafel curves studies. Detailed discussions on the change in corrosion current densities ( i c o r r ), polarization ( R p ) and charge transfer ( R c t ) resistances have been offered to discuss the inhibition efficiency. Water contact angle measurement showed a drastic increase in mild steel surface hydrophobicity following inhibitor 3 adsorption. SEM-EDX and XPS studies confirmed the definitive presence of inhibitor 3 on the mild steel surface. Density functional theory (DFT) studies revealed the frontier molecular orbitals with which the metal surface interacts. A detailed corrosion inhibition mechanism has been offered in the context of adsorption isotherm and DFT studies.

Effectiveness of an amine-based inhibitor—guanidine for steel in chloride-contaminated concrete

A Comparison Study of the Performance of Three Electro-Migrating Corrosion Inhibitors in Improving the Concrete Durability and Rehabilitating Decayed Reinforced Concrete

Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

Research on Chloride Appropriate Dosage for Incorporated Accelerated Corrosion

Effect of Imidazoline Inhibitor on the Rehabilitation of Reinforced Concrete with Electromigration Method

Bidirectional Electromigration of A Corrosion Inhibitor in Chloride Contaminated Concrete

Corrosion Inhibition of A3 Steel by Imidazoline Derivative in 2·0%nacl Solution

Ammonium Phosphate as Inhibitor to Mitigate the Corrosion of Steel Rebar in Chloride Contaminated Concrete Pore Solution

Preliminary experiment study on effectiveness of discrete sacrificial anodes

Synergistic inhibition of benzotriazole and sodium D-gluconate on steel corrosion in simulated concrete pore solution

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Rust Prevention Property of a New Organic Inhibitor under Different Conditions

Effect of ethanolamine as a steel corrosion inhibitor in realkalization of carbonated concrete

Synergistic Effect of Imidazoline Derivative and Benzimidazole As Corrosion Inhibitors for Q235 Steel: an Electrochemical, XPS, FT-IR and MD Study

Corrosion Inhibition of Carbon Steel in Chloride-Acetate Solution and Stratal Water by Nitrogen-Containing Compounds

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Corrosion inhibition of hydrazine on carbon steel in water solutions with different pH adjusted by ammonia

Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution

Inhibiting property of nitrite intercalated layered double hydroxide for steel reinforcement in contaminated concrete condition

Organic Corrosion Inhibitor of Triethylenetetramine into Chloride Contamination Concrete by Eletro-Injection Method