Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

Sustainable LiCoO2 by Collective Glide of CoO6 Slabs Upon Charge/discharge.

Off-Stoichiometry Induced Few-Nanometer Surface Layer for High-Performance Layered Cathode in Nonaqueous and Aqueous Electrolytes

Oxygen-redox Reactions in LiCoO2 Cathode Without O–O Bonding During Charge-Discharge

Phase Transformations And Activation Characteristics Of Layered Orthorhombic Limno2 During Electrochemical Cycling

Unveiling the Evolution of LiCoO2 Beyond 4.6 V

Physical Delithiation of Epitaxial LiCoO 2 Battery Cathodes as a Platform for Surface Electronic Structure Investigation

Spinel-stabilized layered LiCoO2 cathode by surface reconstruction strategy

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

New insight into the atomic structure of electrochemically delithiated O3-Li(₁-x)CoO₂ (0 ≤ x ≤ 0.5) nanoparticles

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

New insight into the atomic structure of electrochemically delithiated O3-Li(1- x)CoO2 (0 ≤ x ≤ 0.5) nanoparticles

Electrochemically Driven Phase Transition in LiCoO2 Cathode

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Chemical and Structural Evolution During the Synthesis of Layered Li(Ni,Co,Mn)O2 Oxides

Investigation on the Overlithiation Mechanism of LiCoO 2 Cathode for Lithium Ion Batteries

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Spontaneous Lithiation of Binary Oxides During Epitaxial Growth on LiCoO2

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Origin of Rapid Delithiation In Secondary Particles Of LiNi0.8Co0.15Al0.05O2 and LiNiyMnzCo1−y−zO2 Cathodes