Abstract:A progressively reinforced cathode/electrolyte interphase (CEI) is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on Z‐LCO, i.e. the fluorination of Zr─O and densification of CEI layer driven by the chemical reaction between ZrOxFy and LiF, greatly reinforcing the toughness of CEI containing inorganic species. Consequently, Z‐LCO achieve an enhanced and reversible O3/H1‐3 phase transition and excellent electrochemical performance at 4.6/4.65 V. For LiCoO2 (LCO) operated beyond 4.55 V (vs Li/Li+), it usually suffers from severe surface degradation. Constructing a robust cathode/electrolyte interphase (CEI) is effective to alleviate the above issues, however, the correlated mechanisms still remain vague. Herein, a progressively reinforced CEI is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on LCO surface (i.e., Z‐LCO). Upon cycle, these Zr─O deposits can promote the decomposition of LiPF6, and progressively convert to the highly dispersed Zr─O─F species. In particular, the chemical reaction between LiF and Zr─O─F species further leads to the densification of CEI, which greatly reinforces its toughness and conductivity. Combining the robust CEI and thin surface rock‐salt layer of Z‐LCO, several benefits are achieved, including stabilizing the surface lattice oxygen, facilitating the interface Li+ transport kinetics, and enhancing the reversibility of O3/H1‐3 phase transition, etc. As a result, the Z‐LCO||Li cells exhibit a high capacity retention of 84.2% after 1000 cycles in 3–4.65 V, 80.9% after 1500 cycles in 3–4.6 V, and a high rate capacity of 160 mAh g−1 at 16 C (1 C = 200 mA g−1). This work provides a new insight for developing advanced LCO cathodes.

Unveiling the Evolution of LiCoO2 Beyond 4.6 V

New insight into the atomic structure of electrochemically delithiated O3-Li(1- x)CoO2 (0 ≤ x ≤ 0.5) nanoparticles

New insight into the atomic structure of electrochemically delithiated O3-Li(₁-x)CoO₂ (0 ≤ x ≤ 0.5) nanoparticles

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Investigation on the Overlithiation Mechanism of LiCoO 2 Cathode for Lithium Ion Batteries

Unveiling the In Situ Evolution of Li2O‐Rich Solid Electrolyte Interface on CoOx Embedded Carbon Fibers as Li Anode Host

Revealing the correlation between structure evolution and electrochemical performance of high-voltage lithium cobalt oxide

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Nanostructure-Mediated Phase Evolution in Lithiation/Delithiation of Co3O4.

Electrochemically Driven Phase Transition in LiCoO2 Cathode

Advancing to 4.6 V Review and Prospect in Developing High‐Energy‐Density LiCoO 2 Cathode for Lithium‐Ion Batteries

Tuning surface chemistry to reduce the step-like degradation of LiCoO<sub>2</sub> at 4.6 V

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Pushing Lithium Cobalt Oxides to 4.7 V by Lattice‐Matched Interfacial Engineering

Oxygen-redox Reactions in LiCoO2 Cathode Without O–O Bonding During Charge-Discharge