Abstract:As a major obstacle to high performance milling, chatter will inevitably decrease tool life, material removal efficiency and workpiece surface quality. Active control based on actuators for chatter suppression has been developed for a long time. However, in traditional active control, the feedback signals are usually time domain vibration signals, which will mitigate both chatter frequencies and normal frequencies, including rotation frequency and its frequency multiplications. In fact, rotation frequency and its frequency multiplications belong to normal cutting phenomenon, which don't need to be suppressed. Therefore, in traditional control strategies, more energy is wasted due to normal frequencies, which cannot obtain the optimal performance and causes the saturation effect of actuators. In order to solve this problem, this paper realized milling chatter suppression based on the adaptive vibration reshaping, which can precisely modify and control the milling vibration frequencies in frequency domain. Hence, the required control forces provided by actuators will decrease a lot, which can optimize the actuator performance and alleviate the saturation effect. Simulation results show that the adaptive vibration reshaping can suppress chatter frequencies effectively without changing rotation frequency and its frequency multiplications, which satisfies the initial control requirement for optimization of actuator performance. Besides, the convergence analysis, the noise resistance performance analysis, the control delay analysis and the chatter frequencies identification errors analysis are also presented for better facilitation to milling chatter suppression. Finally, contrastive milling tests are implemented on a three-axis milling machine. Experimental results show the designed control algorithm can decrease chatter frequencies, while having a little influence on normal frequencies.

Active Control of Milling Chatter Considering the Coupling Effect of Spindle-Tool and Workpiece Systems

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Active Control of Milling Chatter Based on the Built-in Force Actuator

Displacement Difference Feedback Control of Chatter in Milling Processes

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Model Predictive Control Based Chatter Suppression in Milling Process Via Piezoelectric Stack Actuators

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

Model predictive control based active chatter control in milling process

A Chatter Mitigation Technique in Milling Based on H∞-ADDPMS and Piezoelectric Stack Actuators

Fuzzy control of milling chatter with piezoelectric actuators embedded to the tool holder

Chatter Suppression for Milling of Thin-Walled Workpieces Based on Active Modal Control

Milling Stability Prediction and Adaptive Chatter Suppression Considering Helix Angle and Bending

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

Milling Chatter Control Based on Asymmetric Stiffness

Discrete Time-Delay Optimal Control Method for Experimental Active Chatter Suppression and Its Closed-Loop Stability Analysis

Adaptive Vibration Reshaping Based Milling Chatter Suppression

Active chatter control in high speed milling processes based on H∞ almost disturbance decoupling problem

Robust Combined Time Delay Control for Milling Chatter Suppression of Flexible Workpieces

Active Chatter Suppression for Milling Process with Sliding Mode Control and Electromagnetic Actuator

Milling Chatter Mitigation with Projection-Based Robust Adaptive Controller and Active Magnetic Bearing

Suppress Chatter in Milling of Thin-Walled Parts Via Fixture with Active Support