Abstract:Inspections on microstructural design suggest that a high-strength Mg alloy can be achieved via the generation of co-precipitation of prismatic and basal precipitates with high number density and large aspect ratios. Currently, there is a lack of feasible approaches to generating such a microstructure. This work investigated the specific role of various Yb contents on the precipitation behavior, solute segregation and mechanical performance of cast Mg-9Gd-xYb-0.5Zn-0.2Zr alloys (x = 0, 0.5, 1 wt%). It was found that, the age hardening response of Mg-9Gd-0.5Zn-0.2Zr alloy could be significantly improved as the Yb addition increased, primarily ascribed to introduction of dense distribution of both prismatic and basal matrix precipitates involving gamma '', beta' and beta(1). Solute segregation of Yb had been examined utilizing high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), revealing the evidence of strong Yb segregation in both prismatic beta', beta(1) and basal gamma '' precipitates. Quantitative TEM analysis indicated that the increasing Yb addition was found to improve the number density of gamma '', beta' and beta(1) during isothermal ageing at 225 degrees C. The substantial improvement on yield strength (similar to 84 MPa) in peak-aged alloy was thereby achieved due to the co-precipitation of dense prismatic and basal strengthening phases associated with Yb addition (1 wt%). However, in addition to the promoted precipitation of these strengthening phases, Zn-Zr particles were confirmed to act as favorable nucleation sites for prismatic beta(1) phases in the under-aged condition. During prolonged ageing time, the addition of 1 wt% Yb was found to greatly accelerate the growth of these preferentially formed beta(1) phases and part of beta(1) transformed in situ into beta phases, accompanied by the gradual developments of matrix precipitate-free zones (PFZs). The greatly improved uneven distribution of these coarse beta-type phases concomitant with widened PFZs primarily led to the significant reduction in ductility as the Yb content increased up to 1%.

Alignment and Strengthening Effect of Β′ Precipitates in Mg-Gd-Y-Zr During Ageing Process Studied by HAADF-STEM and GPA

Characterisation of Precipitates in a Mg–7Gd–5Y–1Nd–0.5Zr Alloy Aged to Peak-Ageing Plateau

A Detailed HAADF-STEM Study of Precipitate Evolution in Mg–Gd Alloy

Precipitation in Mg-Gd-Y-Zr Alloy: Atomic-scale Insights into Structures and Transformations

Novel structures observed in Mg–Gd–Y–Zr during isothermal ageing by atomic-scale HAADF-STEM

Characterization of β precipitate phase in Mg-7Gd-5Y-1Nd-0.5Zr alloy

Precipitate Evolution in Mg−7Gd−3Y−1Nd−1Zn−0.5Zr Alloy During Isothermal Ageing at 240 °C

Co-precipitation on the Basal and Prismatic Planes in Mg–Gd–Ag–Zr Alloy Subjected to Over-Ageing

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Hrtem Studies of Aging Precipitate Phases in the Mg-10gd-3y-0.4zr Alloy

Effect of precipitates on microstructures and properties of forged Mg-10Gd-2Y-0.5Zn-0.3Zr alloy during ageing process

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Study on the Precipitates in Various Aging Stages and Composite Strengthening Effect of Precipitates and Long-Period Stacking Ordered Structure of Mg–Gd–Y–Ni Alloy

Atomic-scale observation on the precipitates in various aging stages of Mg–Gd–Y–Cu alloy

Atomic-scale Characterization of the Precipitates in a Mg-Gd-Y-Zn-Mn Alloy Using Scanning Transmission Electron Microscopy

Characterization and Strengthening Effect of Precipitate Microstructure in Mg-3nd-3gd-0.2zn-0.5zr Alloy Aged at 225 °C

The Role of Yb Content on the Microstructural Evolution and Mechanical Characteristics of Cast Mg-9Gd-0.5Zn-0.2Zr Alloy

Precipitation in Mg–Nd–Y–Zr–Ca Alloy During Isothermal Aging: A Comprehensive Atomic‐Scaled Study by Means of HAADF‐STEM

Effect of Ageing Treatment on the Precipitation Behaviour of Mg–Gd–Y–Zn–Zr Alloy

On the Strengthening Precipitate Structures in Mg-Gd-Ag Alloy: an Atomic-Resolution Investigation Using Cs-corrected STEM

The Effect of Precipitates on the Fracture Behavior and Tensile Properties of Mg–14Gd–0.5Zr (wt.%) Alloy