Abstract:It is challenging for laser powder bed fusion (LPBF) technique to fabricate metal parts with a wall thickness below 100 μm. This work investigated the critical conditions for achieving extremely thin wall thickness in tungsten grids fabricated via LPBF. Specifically, the impact of low energy density on the printability of tungsten single tracks and grids via LPBF was comprehensively examined. A computational fluid dynamics approach was employed to develop a thermal fluid flow model for single tracks with multilayers in LPBF. The findings demonstrate that at low energy densities, single tracks exhibit four different morphologies, i.e., balling, discontinuity and winding, discontinuity but straightness, as well as continuity and straightness. The simulation model effectively elucidates the continuity of single tracks and provides insights into the governing mechanism of molten pool defects. Due to high thermal diffusion properties of tungsten, the continuity of its track relies on the connection of neighboring molten pools and is sensitive to scanning speed. The tungsten molten pools with low energy density can be categorized into shallow flows affected by surface morphology and deep flows influenced by internal voids of the powder bed. After multi-layer stacking, the track fluctuations and defects in single tracks accumulated into greater surface roughness and deteriorate thin-walled morphology. The critical conditions required for printing extremely thin walls were achieved, ensuring minimal merging of tracks between two layers by maintaining the energy density of 57 J/mm 3 . Based on these findings, an ultra-thin-walled anti-scattering tungsten grid with a wall thickness of 86 μm and a wall roughness below 3.3 μm ( Ra ) was fabricated by LPBF. This work provides valuable theoretical insights and presents a viable methodology for determining the minimum energy density threshold and wall thickness essential for LPBF processing of thin-walled components.

Integrating Thin Wall into Block: a New Scanning Strategy for Laser Powder Bed Fusion of Dense Tungsten

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Simulation and Experimental Investigation on Additive Manufacturing of Highly Dense Pure Tungsten by Laser Powder Bed Fusion

Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites

Molten pool behaviors and printability of tungsten anti-scattering grids with extremely thin wall thickness fabricated via laser powder bed fusion

Laser Powder Bed Fusion of Pure Tungsten: Effects of Process Parameters on Morphology, Densification, Microstructure

Recent Advances on Interface Design and Preparation of Advanced Tungsten Materials for Plasma Facing Materials

A review of tungsten fabricated via laser powder bed fusion

Selective Laser Melting of High-Performance Pure Tungsten: Parameter Design, Densification Behavior and Mechanical Properties

Formation and Extreme Thickness Controlling Mechanism of Ultra-Thin-wall Tungsten Grids Fabricated Via Selective Laser Melting

A Surface Quality Optimization Strategy Based on a Dedicated Melt-Pool Control Via the Dashed-Scan Contouring Technique in Electron Beam Powder Bed Fusion

Experiment and Simulation Investigations on W/Cu Components Prepared by Strong Confinement Thermal Explosive Welding

Defect formation mechanism and suppression strategy in additively manufactured tungsten grid thin-wall structures via laser powder bed fusion

Selective laser melting fabricated tungsten with thin-walled structure: role of linear energy density on temperature evolution and manufacturing quality

Fabrication of High-Density Microarchitected Tungsten via DLP 3D Printing

Dense Pure Tungsten Fabricated by Selective Laser Melting

Innovative Tungsten Coatings for an Application in Modern and Future Fusion Devices

Bonding Tungsten, W–Cu-alloy and Copper with Amorphous Fe–W Alloy Transition

Microstructural Effects of Y2O3 and TiC Additions in Tungsten