Fabrication of High-Density Microarchitected Tungsten via DLP 3D Printing

Jieping Wang,Junyu Cai,Songhua Ma,Wenbin Yi

DOI: https://doi.org/10.26434/chemrxiv-2024-pqzct

2024-04-22

Abstract:Current additive manufacturing (AM) techniques for tungsten, such as powder bed fusion and directed energy deposition, often generate parts with rough surfaces. Vat photopolymerization presents a promising alternative for fabricating intricate tungsten structures with high shape fidelity and low surface roughness. However, existing vat photopolymerization approaches suffer from surface defects and low final density, leading to compromised mechanical properties. Therefore, achieving high-density tungsten structures using vat photopolymerization remains a crucial challenge. This work presents a straightforward and reliable method for fabricating complex, micro-architected tungsten structures with superior density and hardness. The approach utilizes a water-based photoresin with exceptional tungsten ion loading capacity. The photoresin is then patterned using digital light processing (DLP) to create intricate tungsten-laden precursors. A meticulously designed three-step debinding and sintering process subsequently achieves three-dimensional tungsten structures with dense surface morphology and minimal internal defects. The microstructures achieve a minimum feature size of 35 μm, a low surface roughness of 2.86 μm, and demonstrate exceptional mechanical properties. This new method for structuring tungsten opens doors to a broad range of applications, including micromachining, collimators, detectors, and metamaterials.

Chemistry

What problem does this paper attempt to address?

This paper mainly addresses the problem of manufacturing high-density tungsten microstructures using photopolymerization technology in additive manufacturing (AM). Existing methods such as powder bed fusion and directed energy deposition often result in rough surfaces, while the vat photopolymerization offers an alternative method for producing tungsten structures with precise shapes and low surface roughness. However, the current photopolymerization methods suffer from surface defects and low final density, which affect the mechanical properties. The paper introduces a direct and reliable method to manufacture high-density and high-hardness tungsten structures with complex microarchitectures by combining water-based photosensitive resin containing high-concentration tungsten ions with digital light processing (DLP) 3D printing technology. Through a carefully designed three-step degreasing and sintering process, three-dimensional tungsten structures with dense surface morphology and minimal internal defects are achieved. These structures have a minimum feature size of 35 micrometers and a surface roughness of only 2.86 micrometers, demonstrating excellent mechanical properties including a compressive strength of 1552 MPa and a nanohardness of up to 7.5 GPa. This method overcomes the limitations of existing technologies and opens up new possibilities for microdevice manufacturing in areas such as micromachining, collimators, detectors, and metamaterials applications.

Fabrication of High-Density Microarchitected Tungsten via DLP 3D Printing

Three-dimensional porous tungsten via DLP 3D printing from transparent ink

Dense Pure Tungsten Fabricated by Selective Laser Melting

Simulation and Experimental Investigation on Additive Manufacturing of Highly Dense Pure Tungsten by Laser Powder Bed Fusion

A review of tungsten fabricated via laser powder bed fusion

Fabrication of Micro-Scale Radiation Shielding Structures Using Tungsten Nanoink Through Electrohydrodynamic Inkjet Printing

Achieving high-performance pure tungsten by additive manufacturing: Processing, microstructural evolution and mechanical properties

Molten pool behaviors and printability of tungsten anti-scattering grids with extremely thin wall thickness fabricated via laser powder bed fusion

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

Additive manufacturing of micro-architected copper based on an ion-exchangeable hydrogel

High-Resolution Metal 3D Printing via Digital Light Processing

High compression strength pure tungsten fabricated by plasma arc additive manufacturing

Additive manufacturing of micro‐architected copper based on an ion‐exchangeable hydrogel

Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites

Development of Wire + Arc Additive Manufacturing for the production of large-scale unalloyed tungsten components

Microstructure and thermal properties of unalloyed tungsten deposited by Wire + Arc Additive Manufacturing

High-pressure Preparation of Bulk Tungsten Material with Near-Full Densification and High Fracture Toughness

Fabrication of Bulk Tungsten Microstructure Arrays for Hydrophobic Metallic Surfaces Using Inductively Coupled Plasma Deep Etching

Selective laser melting fabricated tungsten with thin-walled structure: role of linear energy density on temperature evolution and manufacturing quality

High‐Precision Printing of Cermets by Collapsable Matrix Assisted Digital Light Processing