Abstract:The microelectromechanical system (MEMS) vibrating ring gyroscope (VRG) holds significant promise for angle sensing applications, with its performance highly reliant on the thermoelastic damping (TED) of the resonating structure. However, the existing TED models struggle to accommodate the complex topology of VRGs. In this study, the wave propagation method is introduced to establish a theoretical TED model for in-plane motion VRGs. The modeling entails a comprehensive analysis of the thermoelastic coupling within the VRG structure, considering the displacement and the coupled temperature field. Treating VRG as a cyclic symmetric structure, the displacement and temperature fields within the minimum repetitive sector can be analyzed first and then extrapolated to the entire structure. The mode shape, natural frequency and temperature variation of the VRG are determined using the wave propagation method. Finally, The TED expression is obtained based on its energy definition. Comparisons with FEM and experimental results demonstrate the high accuracy, computational efficiency and versatility of the present TED model. Parametric analysis reveals that TED in VRGs is determined collectively by the TED of their substructures, with the influence weights depending on their respective strain energy proportions. Specifically, increasing the length and decreasing the width of the substructure, or scaling down the overall size can effectively reduce TED in most cases. VRGs with a larger width are not recommended due to their low TED value and complex TED behavior. Additionally, VRG's TED is predicted to increase rapidly with rising ambient temperature due to the temperature dependence of material properties. This study presents an efficient TED modeling method for complex ring-beam combined structures and offers practical guidelines for designing high Q -factor VRGs.

Damping Analysis of Disk Resonator Gyroscope in Rarefied Gas

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

Research on Energy Dissipation Mechanism of Cobweb-like Disk Resonator Gyroscope

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

Design, Fabrication and Characterization of Disk Resonator Gyroscope with Vibration and Shock Resistance

Structure-air Damping Coupling Analysis of Micromachined Gyroscope

Gas Damping Coefficient Research for MEMS Comb Linear Vibration Gyroscope

Theoretical thermoelastic damping for micro ring gyroscopes by wave propagation

Thermoelastic Damping Based Design, Sensitivity Study and Demonstration of a Functional Hybrid Gyroscope Resonator for High Quality Factor

A Quality Factor Matching Method for MEMS Disk Resonator Gyroscope in Rate Mode

Analysis of Parametric and Subharmonic Excitation in Push-Pull Driven Disk Resonator Gyroscopes

Thermoelastic Damping in MEMS Gyroscopes at High Frequencies

Investigation of nonlinear squeeze-film damping involving rarefied gas effect in micro-electro-mechanical-systems

Dynamic Modeling of the Multiring Disk Resonator Gyroscope

A Wafer-Level Vacuum Packaged MEMS Disk Resonator Gyroscope With 0.42°/h Bias Instability Within ±300°/s Full Scale

Gas Damping of an Electrostatically Levitated Micro-Silicon Gyroscope

Dynamic Performance Improving of MEMS Sensor By Gas Damping Structure

An automatic Q-factor matching method for eliminating 77% of the ZRO of a MEMS vibratory gyroscope in rate mode

0.015 Degree-Per-Hour Honeycomb Disk Resonator Gyroscope

Damping Asymmetry Trimming Based on the Resistance Heat Dissipation for Coriolis Vibratory Gyroscope in Whole-Angle Mode

Study of Intrinsic Dissipation Due to Thermoelastic Coupling in Gyroscope Resonators