Abstract:This work analyses circuit phase delay for carrier-modulation MEMS capacitive gyroscopes. The temperature-dependent circuit phase delay is a major source of gyroscope output drift, which deteriorates the gyroscope bias instability (BI) and angle random walk (ARW). Effects of both drive-mode and sense-mode circuit phase delay on gyroscope performance when using different signal extraction architectures are analyzed in detail. The online suppression method which combines the so-called modified double sideband (MDSB) extraction architecture in the gyroscope drive mode and closed-loop force-rebalance loop in the sense mode can eliminate the impact of residual fluctuation error of circuit phase delay in real time. When drive-mode circuit phase delay equivalently varies from -20 degrees to 20 degrees, using MDSB decreases the fluctuation of the open-loop zero-rate output (ZRO) by 70% compared to using double sideband (DSB) and by 99.7% with respect to using single sideband (SSB). Meanwhile, improvement for the closed-loop ZRO using MDSB is 92.48% and 94% compared to cases using DSB and SSB, respectively. Furthermore, when the equivalent circuit phase delay of the sense-mode alters from -20 degrees to 20 degrees, ZRO variation for the gyroscope with force rebalanced sense loop and quadrature stiffness nulling loop decreases by 80% in contrast to the case with open loop, which demonstrates the effectiveness of online suppression for circuit phase delay of both the drive-mode and sense-mode. Using the online suppression method, the gyroscope has achieved a BI of 0.16 degrees h(-1) and ARW of 0.011 degrees (root h)(-1). Furthermore, using the MDSB in the drive mode obtains the best stability compared to using the DSB and SSB as the temperature changes.

An automatic Q-factor matching method for eliminating 77% of the ZRO of a MEMS vibratory gyroscope in rate mode

A Quality Factor Matching Method for MEMS Disk Resonator Gyroscope in Rate Mode

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

One-time Frequency Sweep to Eliminate IQ Coupling in MEMS Vibratory Gyroscopes

Performance Improvement for MEMS Gyroscopes by Suppressing the Circuit Phase Delay

A Real-Time Automatic Mode-Matching Method Based on Phase-Shifted Virtual Coriolis Force for MEMS Disk Resonator Gyroscope

Effects Of Both The Drive- And Sense-Mode Circuit Phase Delay On Mems Gyroscope Performance And Real-Time Suppression Of The Residual Fluctuation Phase Error

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

An In-Run Automatic Mode-Matching Method With Amplitude Correction and Phase Compensation for MEMS Disk Resonator Gyroscope

A MEMS Rate-Integrating Gyroscope (RIG) With In-Run Automatic Mode-Matching

Research on the Zero-Rate Output Compensation for MEMS Vibratory Gyroscopes

MEMS Gyroscope Automatic Real-Time Mode-Matching Method Based on Phase-Shifted 45° Additional Force Demodulation

4.11-Million Q-factor Whole-Angle MEMS Hemispherical Resonator Gyroscope with 0.013°/h Bias Instability

Low-Noise Quality Factor Tuning in Nondegenerate MEMS Gyroscope Without Dedicated Tuning Electrode

An In-Run Automatic Demodulation Phase Error Compensation Method for MEMS Gyroscope in Full Temperature Range

A Real-Time Circuit Phase Delay Correction System for MEMS Vibratory Gyroscopes

Mechanism Analysis and System Identification of the Quadrature Error in MEMS Gyroscope

A sub 0.8 degree per hour mode-matching MEMS vibratory gyroscope with closed loop control for the sense mode

Rapid start-up control of high Q-factor MEMS gyroscope