Abstract:Herein, a series of ternary to quinary eutectic alloys in the Co–Cr–Fe–Ni–Nb alloy system are designed/located following the simple mixing strategy based on the Ni–Nb, Co–Nb, Cr–Nb, Fe–Nb binary phase diagrams. The designed NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 eutectic alloys are prepared. The phase formation, microstructure evolution, and mechanical properties of the eutectic alloys are studied. All of these designed eutectic alloys are composed of Nb‐rich intermetallic compound phase and Nb‐poor face‐centered cubic (Fcc) phase. However, these eutectic alloys show different eutectic morphology. The FeNiNb0.35 alloy exhibits a compact seaweed eutectic‐dendritic pattern. The CoFeNiNb0.5 alloy shows dendritic eutectic morphology. The CoCrFeNiNb0.45 alloy exhibits eutectic cell morphology. Mechanical tests results indicate that the NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 alloys have higher Vickers hardness and strength. Wherein, the CoCrFeNiNb0.45 alloy is found to combine the best comprehensive mechanical properties with yield strength of 1316 MPa, fracture strength of 2339 MPa, compressive strain of 24.2%, fracture toughness of 18.4 MPa m1/2, and Vickers hardness of 511 HV. The solid solution strengthening of the FCC phase and the hard intermetallic phase strengthening are the major strength mechanism in this eutectic alloys. The NiFeNb0.35, CoFeNiNb0.5, CoCrFeNiNb0.45 eutectic high entropy alloys are successfully designed/located following simple mixing strategy based on the Ni–Nb, Co–Nb, Cr–Nb, Fe–Nb binary phase diagrams. Among these eutectic alloys, the CoCrFeNiNb0.45 quinary alloy shows the best comprehensive mechanical properties with yield strength of 1316 MPa, fracture strength of 2339 MPa, compressive plastic of 24.2%, and Vickers hardness of 511 HV.

Eutectic Composition Design, Microstructure, and Room Temperature Mechanical Property of NiAl-Cr-Ta Three-Phase Alloy

Phase-Field Simulation of the Microstructure Evolution in the Eutectic Alloy NiAl-31Cr-3Mo

The formation mechanism of eutectic microstructures in NiAl-Cr composites

Design and Characterization of a Novel NiAl‐(Cr,Mo) Eutectic Alloy

Microstructure and solidification behaviour of Ni3Al/Ni7Hf2 eutectic alloy

Design Multicomponent Eutectic Alloys in the Co–Cr–Fe–Ni–Nb System Using Simple Mixing Method

Microstructure evolution behavior of Ni3Al (γ′) phase in eutectic γ-γ′ of Ni3Al-based alloy

Designing novel AlCoCrNi eutectic high entropy alloys

Composition design, microstructure and mechanical properties of novel multiphase Ti–Cu–Ni–Nb complex concentrated alloys

Microstructure and mechanical properties of a novel polycrystalline Ni3Al-based intermetallic alloy

Design of a Novel (cocrni)84.5al15.5 Eutectic Medium-Entropy Alloy with Hierarchically Nano-Lamellar Microstructure Through Additively Manufactured Compositionally Graded Materials

Investigations on the NiAl–Cr(Mo) Eutectic Alloy with Optimized Microstructure and Improved Room-Temperature Compressive Properties

STUDY ON MICROSTRUCTURE AND ELEVATED TEMPERATURE MECHANICAL PROPERTY OF DIRECTIONALLY SOLIDIFIED NiAl ALLOY I. Microstructure and Brittle-to-Ductile Transition Temperature

Mechanical and Physical Characterizations of a Three-Phase TiAl Alloy during Near Isothermal Forging

Effects of Aluminum on Microstructure and Compressive Properties of Al-Cr-Fe-Ni Eutectic Multi-Component Alloys

Tensile Properties and Microstructure of DS NiAl—28Cr—5.8Mo—0.2Hf Alloy

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

The microstructure and mechanical properties of novel Fe-rich Fe-Cr-Ni-Ta eutectic multi-principal element alloys

Microstructure Characterization and Tensile Properties of A Ni-Containing Tial-Based Alloy with Heat Treatment

Influence of Tantalum Addition on Microstructure and Mechanical Properties of the Nial-Based Eutectic Alloy

Alloying Effect on the Microstructure and Property of Single Crystal Ni 3 Al Alloys