Abstract:The microstructures and room temperature tensile properties of as-cast and directionally solidified AlCoCrFeNizi eutectic high-entropy alloy were investigated using OM, SEM, EDS, TEM and tensile tests. The microstructure of as-cast alloy, including the well-aligned lamellar structures, the radial emanating lamellar structure and meshlike structure, consists of NiAl-rich (B2) and CoCrFeNi-rich (L1(2)) phases. From the longitudinal section of directionally solidified alloy, when the withdrawal rate is 6 mu m/s, the solid-liquid interface morphology is planar, and the well -aligned lamellar structure is observed. The three-dimensional morphologies of well-aligned lamellar structures are well characterized by deep etching. With increasing the withdrawal rate to 15 mu m/s, the solidliquid interface morphology change from planar to cellular, and the microstructure changes from planar eutectic to cellular eutectic, even the dendritic eutectic at local region occurs at 60 and 120 mu m/s. From the transverse section, the well-aligned lamellar structures occur in the cell interior, and the interlamellar spacing decreases gradually with increasing the withdrawal rates. The TEM result indicates that NiAl-rich phase has an orientation relationship with CoCrFeNi-rich phase of [(1) over bar 11](NiAl.rich)//(1) over bar 22](CoCrseNi-rict,) and (211)(NiAl-rich)// (022)(cocrFeNi.rich). The nano-precipitates occur in NiAl-rich (B2) and CoCrFeNi-rich (L12) phases. The directionally solidified alloy possesses a good combination of strength and ductility at 60 mu m/s. In particular, using the directional solidification technology is a good way to improve the ductility of the alloy (-37%). The strengthening and plasticizing mechanisms are discussed by analyzing the fracture and side surfaces.

Effects of Aluminum on Microstructure and Compressive Properties of Al-Cr-Fe-Ni Eutectic Multi-Component Alloys

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Microstructures and Compressive Properties of NiAl-Cr(Mo) and NiAl-Cr Eutectic Alloys with Different Fe Contents

Microstructures, Compressive Properties, and Microhardness of NiAl-Cr(Mo) Eutectic Alloys with Various Ni Contents

Microstructure and Mechanical Properties of Al25 − xCr25 + 0.5xFe25Ni25 + 0.5x (x = 19, 17, 15 at%) Multi‐Component Alloys

Regulating microstructures and mechanical properties of Al-Fe-Ni alloys

Cooling Rate Effect on Microstructure and Mechanical Properties of Al X CoCrFeNi High Entropy Alloys

Microstructure, fracture toughness and compressive property of as-cast and directionally solidified NiAl-based eutectic composite

Effect of Cr Addition on Microstructure and Mechanical Property of Cu-17Ni-3Al-1.2Fe Alloy

Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys

A promising new class of multi-component alloys with exceptional mechanical properties

Microstructure and Mechanical Property of As-Cast, -Homogenized, and -Deformed AlxCoCrFeNi (0≤x≤2) High-Entropy Alloys

Microstructures and Mechanical Properties of Multi-component Al<sub><i>x</i></sub>CrFe<sub>2</sub>Ni<sub>2</sub>Mo<sub>0.2</sub>High- Entropy Alloys

Effects of Fe on Microstructures and High-Temperature Compressive Mechanical Properties of Nb-16Si-22Ti-2Cr-2Al-2Hf Based Alloy

Microstructure and Mechanical Properties of AlxCoCrCuFeNi Multi-element High Entropy Alloy

Microstructures and Room Temperature Tensile Properties of As-Cast and Directionally Solidified AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Microstructures and Deformation Mechanisms of Cr26Mn20Fe20Co20Ni14 Alloys

Investigations on the NiAl–Cr(Mo) Eutectic Alloy with Optimized Microstructure and Improved Room-Temperature Compressive Properties

Study on the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy

Microstructures and Mechanical Properties of Multi-component AlxCrFe2Ni2Mo0.2 High-Entropy Alloys

Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy