Abstract:Microstructure evolution, phase determination, phase decomposition and transition of mechanically alloyed Al0.8Co0.5Cr1.5CuFeNi during 950-1150 t high temperature sintering, and the effect of sintered microstructures on mechanical properties were investigated. The microstructure was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). Cu separation occurred first, needle-like Cu rich precipitation in the BCC matrix formed the nucle-ation sites of Al-Ni rich decomposition, while fine lath separation and Cu rich decomposition region sur-rounding the FCC matrix were formed in the FCC matrix, and the remaining FCC matrix formed L12 order. Ordered Al-Ni rich decomposition in BCC matrix appeared after 1000 t sintering. As sintering tempera-ture increased, Al-Ni rich decomposition increased and coarsened and length-width ratio increased. a phase precipitated after 950 t, 1000 t and 1050 t sintering, and disappeared as sintering temperature was higher than 1100 t. Yield strength of sintered alloy decreased from 1445.9 MPa to 1151.5 MPa, and hardness decreased from 714.2 HV to 536.3 HV as sintering temperature increased. The significant increase in plasticity after 1100 t and 1150 t was due to dissolution of a phase. Dislocation accumula-tion around a phase caused development of micro cracks and reduced the plasticity.(c) 2022 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).

Cooling Rate Effect on Microstructure and Mechanical Properties of Al X CoCrFeNi High Entropy Alloys

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effect of Cooling Rate on Microstructure and Mechanical Properties of Al0.3CoCrFeNi High-Entropy Alloy

Microstructure and Mechanical Property of As-Cast, -Homogenized, and -Deformed AlxCoCrFeNi (0≤x≤2) High-Entropy Alloys

Effect of C Content on Microstructure and Tensile Properties of As-Cast CoCrFeMnNi High Entropy Alloy

Effect of Cr on microstructure and mechanical properties of FeCoNiAlCrx high entropy alloys br

Microstructure transition and mechanical property variation of Al0.6CoCrFeNi high-entropy alloys prepared under different cooling rates

Microstructure evolution, phase decomposition and transition of Al0.8Co0.5Cr1.5CuFeNi HEA during high temperature sintering and mechanical properties corresponding to different microstructures

Study on Microstructure Evolution and Mechanical Properties of CoCrFeNiTiAlx High Entropy Alloys

Effects of Sc addition on microstructure, phase evolution and mechanical properties of Al0.2CoCrFeNi high-entropy alloys

The Strengthening Effects of Relatively Lightweight AlCoCrFeNi High Entropy Alloy

Effects of Aluminum on Microstructure and Compressive Properties of Al-Cr-Fe-Ni Eutectic Multi-Component Alloys

Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys

The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys

Microstructure and Mechanical Properties of AlxCoCrCuFeNi Multi-element High Entropy Alloy

Evolution of Microstructure and Mechanical Properties of As-Cast Al x CrFe 2 Ni 2 High-Entropy Alloys with Al Content

Relationship Between Cooling Rate, Microstructure Evolution, and Performance Improvement of an Al–Cu Alloy Prepared Using Different Methods

Effect of Thermomechanical Processing on Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy

Cooling Rate and Size Effect on the Microstructure and Mechanical Properties of Alcocrfeni High Entropy Alloy

Microstructures, Tensile Properties and Serrated Flow of AlxCrMnFeCoNi High Entropy Alloys