Abstract:Influence of partial substitution of Cr by Al on microstructure and mechanical behavior of Fe30Ni35Cr35 multi-principal element alloy (MPEA) was investigated. In detail, Co-free Fe30Ni35Cr(35-x)Alx (x = 10, 12.5, 13.75 and 15 at.%) MPEAs were prepared by a vacuum arc melting process, subsequently, microstructure and tensile properties of these MPEAs were carefully studied. The as-cast Fe30Ni35Cr(35-x)Alx alloys are composed of face-centered cubic (FCC) and body-centered cubic (BCC) phases with spherical B2 nano-precipitates embedded in the BCC phase and B2 lamellar structure surrounding the BCC phase simultaneously. In particular, Al content strongly influences the solidification process of these alloys; with increasing Al content, the initial morphology varied from columnar dendritic grains (10 < x < 13.75) to equiaxed grains with Widmanstätten structures (x = 15) and resulted in increased tensile strength and hardness with reduced ductility. The as-cast Fe30Ni35Cr21.25Al13.75 alloy exhibits the best mechanical properties in Fe30Ni35Cr(35-x)Alx alloys with an ultimate tensile strength (UTS) of ∼1111.8 ± 11.4 MPa and a total elongation of ∼20.7 ± 2.1%. Furthermore, our study demonstrates outstanding combinations of ductility and strength in multi-phase MPEAs, ascribing to various complementary strengthening mechanisms, such as hetero-deformation induced (HDI) hardening and precipitation strengthening, which influence the work hardening and dislocation movement at different tensile strains.

Microstructure and Mechanical Properties of Al25 − xCr25 + 0.5xFe25Ni25 + 0.5x (x = 19, 17, 15 at%) Multi‐Component Alloys

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Microstructures and Mechanical Properties of Multi-component Al<sub><i>x</i></sub>CrFe<sub>2</sub>Ni<sub>2</sub>Mo<sub>0.2</sub>High- Entropy Alloys

Effects of Aluminum on Microstructure and Compressive Properties of Al-Cr-Fe-Ni Eutectic Multi-Component Alloys

Microstructures and Mechanical Properties of Multi-component AlxCrFe2Ni2Mo0.2 High-Entropy Alloys

Influence of Partial Substitution of Cr by Al on Microstructure and Mechanical Behavior of Fe30Ni35Cr35 Multi-Principal Element Alloy

Microstructures and Deformation Mechanisms of Cr26Mn20Fe20Co20Ni14 Alloys

Mechanical Properties of Rapidly Solidified Fe–Al–B Ternary Alloys

Evolution of Microstructure and Mechanical Properties of As-Cast Al x CrFe 2 Ni 2 High-Entropy Alloys with Al Content

Microstructure and Properties of Multi-Component AlxCoCrFeNiTi0.5 High-Entropy Alloys

Microstructure and Mechanical Properties of Multi-Component AlCrFeNiMox High-Entropy Alloys

Microstructures and Compressive Properties of NiAl-Cr(Mo) and NiAl-Cr Eutectic Alloys with Different Fe Contents

Microstructures, Tensile Properties and Serrated Flow of AlxCrMnFeCoNi High Entropy Alloys

Microstructures, Compressive Properties, and Microhardness of NiAl-Cr(Mo) Eutectic Alloys with Various Ni Contents

The Mechanical Properties of Near-equiatomic B2/f.c.c. FeNiMnAl Alloys

Microstructures and mechanical properties of heat-treated Al-5.0Cu-0.5Fe squeeze cast alloys with different Mn/Fe ratio

Phase Selection and Mechanical Properties of CoCrFexNiMn Multicomponent Alloys with Equivalent Electron Concentrations

Cooling Rate Effect on Microstructure and Mechanical Properties of Al X CoCrFeNi High Entropy Alloys

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Microstructural stability and mechanical properties of BCC-based Fe3.5Cr1.5NiAl0.8 multicomponent alloy