Abstract:Millimeter-sized ZTA (zirconia toughened alumina) particles + WC (tungsten carbide) particles reinforced hypereutectic high chromium cast iron (H-HCCI) composites were prepared by liquid phase sintering. The volume fraction, stacking method and sintering process of the reinforced particles in the composites were designed. The interfacial bonding mechanism between the reinforcements and the matrix in the composites was systematically discussed. The results show that when the sintering temperature is 1380 °C, the volume percentage of ZTA particles, WC particles and H-HCCI is set to 10, 30 and 60%, respectively, and the reinforced particles are mixed and stacked, the prepared sample has the best performance. The average nano-hardness of ZTA particles, the interface layer between ZTA particles and H-HCCI matrix, WC particles and H-HCCI matrix in the composites are 20.83, 19.08, 23.33 and 16.39 GPa, respectively. The Young's moduli of each component in the composites are 330.56, 289.41, 300.68 and 232.11 GPa, respectively. Based on the results of friction and wear experiments, the average wear depth of ZTA particles is 6.589 μm, the average wear depth of WC particles is 4.872 μm, and the average wear depth of H-HCCI matrix is 9.802 μm.Through performance testing, it was found that the hybrid reinforced composites showed excellent comprehensive properties. This paper provides theoretical support for multiphase reinforced composites, and proposes a new method for preparing ZTA particle reinforced metal matrix composites, which realizes the metallurgical interface bonding between ceramics and metals.

Study on Surface WC Particle Reinforced Chromium Abrasion Resistant White Cast Irons Composite

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

On the Preparation and Wear Properties of Ceramic Particle-reinforced High-chromium Cast Iron-based Surface Composite Material

Effect of In-Situ (ti&w)c Multiphase Particles on Three-Body Abrasive Wear of High Chromium Cast Iron

Interfacial Bonding And Abrasive Wear Behavior Of Iron Matrix Composite Reinforced By Ceramic Particles

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Preparation and Properties of ZTA + WC Particles/Hypereutectic High Chromium Cast Iron Composites

Spark Plasma Sintering Preparation of Tungsten Carbide-Reinforced Iron-Based Composite Materials: Wear Resistance Performance and Mechanism

Wear Behavior of WC/GCr15 Steel Composite Prepared by Electroslag Melting and Casting

Abrasive wear behavior and mechanism of high chromium cast iron

Interfacial bonding and wear behavior of macroscopic TiC particulates reinforced iron-based composites fabricated by infiltration casting process

Microstructure and Wear Resistance of WC and High Chromium Cast Iron Hardfacing Layers

Microstructure and high-temperature wear properties of in situ TiC composite coatings by plasma transferred arc surface alloying on gray cast iron

Preparation and Microstructural Characterization of a High-Cr White Cast Iron Reinforced with WC Particles

Wearing and interfacial characterization of zirconia toughened alumina reinforced high chromium cast iron composites in an actual working condition

Effect of Surface Melting and Chromium Surface Alloying on Wear Behavior of Ductile Iron

Recent Developments in Fabrication of Ceramic Particle Reinforced Iron Matrix Wear Resistant Surface Composite Using Infiltration Casting Technology

Preparation and Impact‐abrasive Wear Behavior of NbC Reinforced Iron Matrix Composites

Microstructure and properties of W Cu composites reinforced by in-situ generated WC

Microstructural evolution and performance analysis of WC-11Co reinforced iron matrix composites