Abstract:In this study, Fe-45%WC hardfacing coating was applied using flux core welding wire on ductile cast iron substrate by the GTAW process. Microstructural characterization and wear performance measurements were performed at room and 400 °C. The matrix phase of the hardfaced coating contained dendrites that chemically contained Fe and other elements such as Ni and Cr, diffused from the buffer layer. In the inter-dendritic spaces, tungsten-rich Eta carbides (Fe 3 W 3 C) with fish-bone morphology as well as chromium-rich carbides (Cr 7 C 3 ) with leaf-shaped morphology were observed. The formation of eta-carbide was due to the dissolution of WC particles during the thermal effect of the hardfacing process, and the formation of Chromium carbide was caused by dilution of the chromium element from the buffer layer. For the room temperature wear test, a protective tribolayer was formed on the wear track due to the presence of graphite in ductile cast iron, which acted as a lubricant. However, this tribolayer was unable to protect the cast iron, and it was removed during the wear test at room temperature because of its low adhesion, leading to severe wear of the base metal. On the other hand, for the Fe-45% WC hardfaced coating, despite the lack of formation of the lubricant at room temperature, much better wear resistance was observed as compared to the base metal, mainly due to its higher hardness and also presence of WC reinforcing particles in its structure. For the high temperature wear test at 400 °C, due to the formation of a continuous tribolayer, with good adhesion on the wear track of base metal and hardfaced coating, higher hardness, and trapping of WC debris in the tribolayer for the Fe-45%WC hardfaced cast iron, much better wear resistance in comparison to the room temperature wear test was observed.

Microstructure and Wear Resistance of WC and High Chromium Cast Iron Hardfacing Layers

Microstructure and Corrosion Behaviour of WC-Co Coating Fabricated by Plasma Arc Welding

An Investigation on Room and High Temperature Wear Performance of Fe-45%WC Hardfaced Coating Applied on Ductile Cast Iron

WC-Fe Layer with High Volume Fraction and Fracture Toughness on Cast Iron Fabricated by in Situ Solid-Phase Diffusion

Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Effect of interlayer temperature and extremely low terminal cooling temperature on the microstructure and wear resistance of Fe-based hardfacing alloy

Effect of cooling conditions on microstructure evolution and wear behavior of high chromium cast iron hardfacing layer

Interfacial characteristics and wear resistance of WCp/white-cast-ion composites

Improvement in microstructure and wear-resistance of high chromium cast iron/medium carbon steel bimetal with high vanadium

Microstructure and wear resistance of Fe-Cr-C-Mo-V-Ti-N hardfacing layers

Microstructure and Properties of Abrasive Wearability Hardfacing Welding Based on TiC-VC

Microstructure and abrasive wear properties of high-vanadium-chromium wear resistant alloy

Microstructure and Wear Resistance of High-Chromium Cast Iron with Multicomponent Carbide Coating via Laser Cladding

Preparation and Wear Resistance of Tungsten Carbide Layer at Gray Cast Iron Surface

Interfacial Characteristics of WC Particles Reinforced Hadfield Steel Matrix Composites

Microstructure and Wear Behavior of High-Cr WCI Matrix Surface Composite Reinforced with Cemented Carbide Rods

Interface and wear characteristics of high-Cr cast iron matrix composite reinforced with cemented carbide particles

Exploring the wear mechanism of surface hardfacing Stellite 6 alloy on the cast iron over the wide temperature range

Interface microstructure and abrasive wear properties of WC-iron matrix composites with Ni, Mo, Fe added to the preforms

Effects of WC on the Microstructure, Wear and Corrosion Resistance of Laser-Deposited CoCrFeNi High Entropy Alloy Coatings