Abstract:There is a risk of InGaZnO thin film transistor (IGZO TFT) failure, especially electro-static discharge (ESD) damage of gate driver on array (GOA) circuits, due to the combination of Cu interconnect, InGaZnO (IGZO) active layer and SiNx/SiO2 insulating layer used to realize large-scale ultra-high resolution display. It is found that the IGZO TFT damage position caused by ESD occurs between the source/drain metal layer and the gate insulator. The Cu metal of gate electrode diffuses into the gate insulator of SiNx/SiO2. The closer to the ESD damage area the IGZO TFT is, the more serious the negative bias of its threshold voltage (V-th) is until the device is fully turned on. The IGZO TFT with a large channel width-to-length ratio(W/L) in GOA circuit results in a serious negative bias of threshold voltage. In this paper, the ESD failure problem of GOA circuit in the IGZO TFT backplane is systematically analyzed by combining the ESD device level analysis with the system level analysis, which combines IGZO TFT device technology, difference in metal density between GOA region and active area on backplane, non-uniform thickness distribution of gate metal layer and gate insulator and so on. In the analysis of ESD device level, we propose that the diffusion of Cu metal from gate electrode into SiNx/SiO2 leads to the decrease of effective gate insulator layer, and that the built-in space charge effect leads to the decrease of the anti-ESD damage ability of IGZO TFT. In the analysis of ESD system level, we propose that the density of metal layers in GOA region is 4.5 times higher than that in active area of display panel, which makes the flatness of metal layer in GOA region worse. The non-uniformity of thickness of Cu metal film, SiNx film and SiO2 film around glass substrate lead to the position dependence of the anti-ESD damage ability of IGZO TFT in the GOA region. If there is a transition zone of film thickness change in IGZO TFT with large area, the ESD failure will occur easily. Accordingly, we propose to split large area IGZO TFT into several sub-TFT structures, which can effectively improve the ESD failure.

A GOA Circuit Composed of A-Igzo TFT with Q-point Precharge Function

A New Goa Circuit Composed Of A-Igzo Tft With Function Of Prevent Q-Point Leakage

A Negative Pulse GOA Circuit Consisted of A-Igzo TFT

P-5.2: A gate driver circuit with a-IGZO TFTs for a 15-inch AMOLED display

Design of a IGZO TFT-based GOA circuit for external compensation pixel circuits

A Low Level Pulse GOA Circuit Consisted of a-IGZO TFT

A Low Power TG A-Igzo TFT Gate Driver Circuit for AMOLED Display

Design of Split Oxide TFT with Large Size for GOA Circuit

1.2: <i>Invited Paper:</i> Dynamic threshold voltage compensation IGZO‐GOA circuit for AMOLED display

Robust Gate Driver on Array Based on Amorphous IGZO Thin-Film Transistor for Large Size High-Resolution Liquid Crystal Displays

Dual-Gate A-Igzo TFTs for Gate Driver Application

P-15: AZO Etch Buffer Layer Based Back-Channel-Etch A-Igzo TFT Technology

Gate Driver on Array With Multiple Outputs and Variable Pulse Widths for Low-Temperature Polysilicon and Oxide (LTPO) TFTs Driven AMOLED Displays

Electro-static Discharge Failure Analysis and Design Optimization of Gate-Driver on Array Circuit in InGaZnO Thin Film Transistor Backplane

P-28: Robust Gate Driver Design with Etching-Stop-Layer Type InGaZnO TFTs Using Stack Buffer Structure

Charge Trapping and Emission Properties in CAAC-IGZO Transistor: A First-Principles Calculations

An a-InGaZnO TFT Gate Driver Circuit with Positive Feedback Effect

Double Gated a-InGaZnO TFT Properties Based on Quantitative Defect Analysis and Computational Modeling

P‐1.14: an A‐igzo TFT AMOLED Pixel Circuit with Source Follower Structure to Alleviate Hysteresis Effect

A Gate Driver Circuit with the Two-Stage Pre-Charge Structure for In-Cell Touch Panels

High-Performance Amorphous InGaZnO Thin-Film Transistor Gated by HfAlOₓ Dielectric with Ultralow Subthreshold Swing