Abstract:Because n-type Bi2Te3-based materials exhibit lower thermoelectric performance than p-type materials and because their thermoelectric properties are sensitively changed by the composition and carrier concentration, optimizing these aspects in n-type materials is necessary to improve the thermoelectric figure of merit (ZT). In this study, the thermoelectric performance of n-type Bi2Te3-based materials was improved by reducing thermal conductivity through the formation of a Bi2Te3-Bi2Se3 solid solution, Bi2Te3-ySey and optimizing the carrier concentration through doping. As the amount of Se increased in Bi2Te3-ySey, the carrier concentration decreased, resulting in decreased electrical and thermal conductivities and increased Seebeck coefficients. As a result, Bi2Te2.85Se0.15 exhibited ZT = 0.56 at 323 K, and Bi2Te2.4Se0.6 exhibited ZT = 0.60 at 423 K. Among the Bi2Te3-ySey solid solutions, the doping effect was investigated for Bi2Te2.85Se0.15 and Bi2Te2.7Se0.3, which recorded excellent thermoelectric performance at low temperatures. When halogen element (I) was doped, the power factor improved owing to the increase in carrier concentration, and the thermal conductivity decreased. As a result, the ZT values were greatly enhanced to ZT = 0.90 at 423 K for Bi2Te2.85Se0.15:I0.005 and ZT = 1.13 at 423 K for Bi2Te2.7Se0.3:I0.0075. When the transition elements (Cu and Ag) were doped, the power factor was improved by the increase in Seebeck coefficient, and thereby Bi2Te2.85Se0.15:Ag0.01 and Bi2Te2.85Se0.15:Ag0.01 exhibited ZT = 0.76 and ZT = 0.75 at 323 K, respectively, and Bi2Te2.7Se0.3:Cu0.01 exhibited ZT = 0.73 at 423 K. Conversely, doping with other transition elements (Ni and Zn), as well as group-III (Al and In) and group-IV (Ge and Sn) elements, resulted in power factors and thermal conductivities that were similar to or slightly less than those of undoped Bi2Te2.85Se0.15, leading to minimal or no improvement in ZT. Next, n-type Bi2Te2.85Se0.15:I0.005 and Bi2Te2.7Se0.3:I0.0075, which exhibited the best thermoelectric performances, were fabricated as bulky compacts, and the uniformity of their thermoelectric properties were evaluated.

Electrical and Thermal Transport Properties of <i>n</i> ‐type Bi <sub>6</sub> Cu <sub>2</sub> Se <sub>4</sub> O <sub>6</sub> (2BiCuSeO + 2Bi <sub>2</sub> O <sub>2</sub> Se)

Synergistically enhanced thermoelectric properties in n-type Bi6Cu2Se4O6 through inducing resonant levels

Quasi-layered Crystal Structure Coupled with Point Defects Leading to Ultralow Lattice Thermal Conductivity in n-Type Cu 2.83 Bi 10 Se 16

Enhancing thermoelectric performance of n-type Bi6Cu2Se4O6 through introducing transition metal elements

The Roles Of Na Doping In Bicuseo Oxyselenides As A Thermoelectric Material

Electrical and Thermal Transport Behavior in Zn-Doped BiCuSeO Oxyselenides

Thermoelectric Properties of Strained -Cu<sub>2</sub>Se

First-Principles Study on Thermoelectric Properties of Bi _2 O _2 Se

High thermoelectric performance of oxyselenides: intrinsically low thermal conductivity of Ca-doped BiCuSeO

Electrical and Thermal Transport Properties of Layered Bi 2 YO 4 Cu 2 Se 2

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi 2 Te 2.7 Se 0.3 by Cu Doping

Polycrystalline Bicuseo Oxide As A Potential Thermoelectric Material

Bi8Se7: Delocalized Interlayer π-Bond Interactions Enhancing Carrier Mobility and Thermoelectric Performance near Room Temperature

Thermoelectric Properties of n-Type Bi4O4SeX2 (X = Cl, Br)

Thermoelectric Properties of Bi2O2Se Single Crystals

Uniformity of Thermoelectric Properties of N-type Bi<sub>2</sub>Te<sub>3-y</sub>Se<sub>y</sub> Bulky Compacts

Synergistically optimized electron and phonon transport of p-type BiCuSeO oxyselenides via Pb dopant and Te composite

Anisotropic Thermoelectric Properties of N-Type Te-Free (bi, Sb)2Se3 with Orthorhombic Structure

ChemInform Abstract: Enhanced Thermoelectric Performance of N‐Type Bi2Se3 Doped with Cu.

The New Thermoelectric Semiconductors Pb5Sb12+xBi6−xSe32 with Ultralow Thermal Conductivity

Intrinsically Low Thermal Conductivity In Bisbse3: A Promising Thermoelectric Material With Multiple Conduction Bands