Abstract:The reduced graphene oxide (rGO) is first introduced into the matrix to modify the microstructure for enhancing carrier mobility, which leads to improved electrical conductivity. Next, the donor dopant Nb is chosen to substitute Bi for increasing carrier concentration, thus further improving electrical conductivity. Finally, a record‐breaking ZTmax ≈0.5 at 873 K is achieved in Bi5.91Nb0.09Cu2Se3.6Cl0.4O6 + 0.5% rGO. Bi6Cu2Se4O6 is considered as an ideal n‐type thermoelectric material to pair with p‐type BiCuSeO for preparing oxyselenide‐based thermoelectric devices, but its thermoelectric performance is limited by poor electrical conductivity. In this research, the reduced graphene oxide (rGO) nanosheets are introduced into Bi6Cu2Se3.6Cl0.4O6 matrix through liquid‐phase shear exfoliation to modify the microstructure. rGO can insert into matrix grains as intercalations, or embed into grain boundaries as wetting phase, and prompt grain alignment, which contributes to the significantly enhanced carrier mobility, thus leading to an improvement in electrical conductivity from ≈15 S cm−1 to ≈230 S cm−1 at 303 K. Whereafter, the effective donor dopant Nb is chosen to substitute Bi. The carrier concentration is increased without damaging the carrier mobility, resulting in a further improved electrical conductivity of ≈840 S cm−1 at 303 K. Lattice thermal conductivity is also suppressed owing to the intensive phonon scattering by point defects and grain boundaries. Ultimately, a record‐breaking peak ZT ≈0.5 (873 K) and average ZT ≈0.3 (303–873 K) can be achieved in Bi5.91Nb0.09Cu2Se3.6Cl0.4O6 + 0.5% rGO. The microstructure optimization method in this research effectively improves thermoelectric performance, and is anticipated to be applied in other thermoelectrics.

Enhancing thermoelectric performance of n-type Bi6Cu2Se4O6 through introducing transition metal elements

Light Element Doping and Introducing Spin Entropy: an Effective Strategy for Enhancement of Thermoelectric Properties in BiCuSeO.

Synergistically enhanced thermoelectric properties in n-type Bi6Cu2Se4O6 through inducing resonant levels

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Enhanced Thermoelectric Performance of Zn-doped Oxyselenides: BiCu1−x Zn X SeO

Enhanced thermoelectric performance of n-type Bi 2 Se 3 doped with Cu

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi2Te2.7Se0.3 by Cu Doping

Realization of N-Type and Enhanced Thermoelectric Performance of P-Type BiCuSeO by Controlled Iron Incorporation

Synergistically optimized electron and phonon transport of p-type BiCuSeO oxyselenides via Pb dopant and Te composite

Fine-Tuning Bi2Te3-Copper Selenide Alloys Enables an Efficient n-Type Thermoelectric Conversion

Boosting Thermoelectric Performance of BiCuSeO by Improving Carrier Mobility Through Light Element Doping and Introducing Nanostructures

Synergistic Effects of Cui Doping on Enhancing Thermoelectric Performance for N-Type Bi 2O 2se Fabricated by Mechanical Alloying

Enhanced Thermoelectric Performance of N-Type Bi2(Se, Te)3 Bulk Nanocomposites Through Ti Doping

Electrical and Thermal Transport Behavior in Zn-Doped BiCuSeO Oxyselenides

Microstructure Optimization in the Shear‐Exfoliated Bi6Cu2Se4O6 through Introducing Reduced Graphene Oxide Leads to Wide‐Ranged Thermoelectric Performance

Co-doping for Significantly Improved Thermoelectric Figure of Merit in P-Type Bi1-2xMgxPbxCuSeO Oxyselenides

Enhanced thermoelectric performance of BiCuSeO through composite structuring with Pb-and La-doped components

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi 2 Te 2.7 Se 0.3 by Cu Doping

Enhancement of the Thermoelectric Properties of BiCuSeO Via in Doping and Powder Size Controlling

Attempting to Realize N-Type BiCuSeO

Synergistically Optimizing Electrical and Thermal Transport Properties of BiCuSeO Via a Dual‐Doping Approach