Abstract:This study investigated how printing conditions influence the fracture behaviour of 3D-printed acrylonitrile butadiene styrene (ABS) under tensile loading. Dog-bone-shaped ABS specimens were produced using the fusion filament fabrication technique, with varying printing angles. Tensile tests were conducted on pre-notched specimens with consistent pre-notch lengths but different orientations. Optical and scanning electron microscopies were employed to analyse crack propagation in the pre-notched specimens. In order to support experimental evidence, finite element computation was implemented to study the damage induced by the microstructural rearrangement of the filaments when subject to tensile loading. The findings revealed the simple linear correlation between the failure properties including elongation at break and maximum stress in relation to the printing angle for different pre-notch lengths. A more progressive damage was found to support the ultimate performance of the studied material. This experiment evidence was used to build a damage model of 3D-printed ABS that accounts for the onset, growth, and damage saturation. This damage modelling is able to capture the failure properties as a function of the printing angle using a sigmoid-like damage function and a modulation of the stiffness within the raster. The numerical results demonstrated that damage pattern develops as a result of the filament arrangement and weak adhesion between adjacent filaments and explains the diffuse damage kinetics observed experimentally. This study concludes with a topological law relating the notch size and orientation to the rupture properties of 3D-printed ABS. This study supports the idea of tailoring the microstructural arrangement to control and mitigate the mechanical instabilities that lead to the failure of 3D-printed polymers.

Morphology on ABS and PC/ABS Series of Polymer Alloy Influence on Mechanical Properties

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

A Predictive Parameter for the Shape Memory Behavior of Thermoplastic Polymers

Morphology and mechanical properties of Acrylonitrile-styrene-acrylate toughened plastics with block copolymer chain structure: Acrylonitrile-styrene-acrylate (ASA) toughened plastics with block copolymer chain structure

Phase Morphology Evolvement and Properties of High Flowability PC/ABS Alloy

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

MORPHOLOGY AND MECHANICAL PROPERTIES OF NYLON-6/ABS POLYMER BLENDS COMPATIBILIZED BY STYRENE-MALEIC ANHYDIDE COPOLYMER

Research on high quality PC/ABS alloy

Morphology, viscoelastic properties and the mechanical performance of highly toughened polyamide 6/acrylonitrile–butadiene–styrene/polylactic acid ternary blends

Investigation of Toughening Mechanisms in Elastomeric Polycarbonate Blends through Morphological and Mechanical Characterization at Small and Medium Strain Rates

Study of Dynamic Failure Behavior of a Type of PC/ABS Composite

Fatigue resistance and failure behavior of reaction compatibilized PC/ABS blends under tensile cyclic loading

Effect of ABS types on the morphology and mechanical properties of PA6/ABS blends by in situ reactive extrusion

The Influence of Microstructural Arrangement on the Failure Characteristics of 3D-Printed Polymers: Exploring Damage Behaviour in Acrylonitrile Butadiene Styrene

Effect of Interface on Brittle - Ductile Transition and Fracture Behavior of ABS/PA6 Blends

Morphological Characterization of ABS and PC-ABS Surfaces for Automotive Industry

Analysis of mesostructural characteristics and their influence on tensile strength of ABS specimens manufactured through fused deposition modeling

Mechanical characterization and experimental modal analysis of 3D Printed ABS, PC and PC-ABS materials

Morphology and Mechanical Behaviors of Rigid Organic Particles Reinforced Polycarbonate

An investigation on the toughening behavior and morphology of acrylonitrile butadiene styrene/polybutylene terephthalate blends reinforced by carbon nanotubes

Experimental and Modeling Study of the Compressive Behavior of PC/ABS at Low, Moderate and High Strain Rates