Abstract:Purpose The purpose of this study, most recent advancements in threedimensional (3D) printing have focused on the fabrication of components. It is typical to use different print settings, such as raster angle, infill and orientation to improve the 3D component qualities while fabricating the sample using a 3D printer. However, the influence of these factors on the characteristics of the 3D parts has not been well explored. Owing to the effect of the different print parameters in fused deposition modeling (FDM) technology, it is necessary to evaluate the strength of the parts manufactured using 3D printing technology. Design/methodology/approach In this study, the effect of three print parameters − raster angle, build orientation and infill − on the tensile characteristics of 3D-printed components made of three distinct materials − acrylonitrile styrene acrylate (ASA), polycarbonate ABS (PC-ABS) and ULTEM-9085 − was investigated. A variety of test items were created using a commercially accessible 3D printer in various configurations, including raster angle (0°, 45°), (0°, 90°), (45°, −45°), (45°, 90°), infill density (solid, sparse, sparse double dense) and orientation (flat, on-edge). Findings The outcome shows that variations in tensile strength and force are brought on by the effects of various printing conditions. In all possible combinations of the print settings, ULTEM 9085 material has a higher tensile strength than ASA and PC-ABS materials. ULTEM 9085 material's on-edge orientation, sparse infill, and raster angle of (0°, −45°) resulted in the greatest overall tensile strength of 73.72 MPa. The highest load-bearing strength of ULTEM material was attained with the same procedure, measuring at 2,932 N. The tensile strength of the materials is higher in the on-edge orientation than in the flat orientation. The tensile strength of all three materials is highest for solid infill with a flat orientation and a raster angle of (45°, −45°). All three materials show higher tensile strength with a raster angle of (45°, −45°) compared to other angles. The sparse double-dense material promotes stronger tensile properties than sparse infill. Thus, the strength of additive components is influenced by the combination of selected print parameters. As a result, these factors interact with one another to produce a high-quality product. Originality/value The outcomes of this study can serve as a reference point for researchers, manufacturers and users of 3D-printed polymer material (PC-ABS, ASA, ULTEM 9085) components seeking to optimize FDM printing parameters for tensile strength and/or identify materials suitable for intended tensile characteristics.

Analysis of mesostructural characteristics and their influence on tensile strength of ABS specimens manufactured through fused deposition modeling

Study of Processing Parameters in Fused Deposition Modeling Based on Mechanical Properties of Acrylonitrile‐butadiene‐styrene Filament

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Correlation between production parameters and mechanical properties of ABS plus p430 fused deposition material

Structure and Mechanical Behavior of Additive Manufactured Fused Deposition Modeling ABS

Mechanical properties evaluation of FFF-printed ABS samples based on different process parameters combined with ANOVA and regression analysis

Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling

Effect of process parameters on flexural strength and surface roughness in fused deposition modeling of PC-ABS material

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Development of a laser‐assisted fused deposition modeling process for improvement in bond tensile strength of ABS

Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process

Mechanical Properties of Raw Filaments and Printed Specimens: Effects of Fiber Reinforcements and Process Parameters

Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation

The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis

Experimental Study of the Tensile Behavior of Structures Obtained by FDM 3D Printing Process

Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Anisotropic material properties of fused deposition modeling ABS

Using extrusion-based 3D printing technology to investigate the impact of changing print conditions on tensile characteristics

Effects of fused filament fabrication (FFF) process parameters on tensile and flexural properties of ABS/PLA multi-material

The effect of orientation difference in fused deposition modeling of ABS polymer on the processing time, dimension accuracy, and strength

Influence of Build Orientation and Part Thickness on Tensile Properties of Polyamide 12 Parts Manufactured by Selective Laser Sintering