Abstract:The graphical abstract is about transient thermal stress fields of different component materials at different moments of time, changes in relative density and open porosity of ceramic materials at different B4C volume fractions and changes in mechanical properties of ceramic materials at different holding times. In addition, the graphical abstract has information on SEM morphology of specimen sections at different sintering temperatures and SEM images of crack propagation in the TiB2‐20 vol% B4C ceramics. A finite model incorporating microstructure was developed to investigate the thermal shock resistance of TiB2‒B4C composite ceramic cutting tool materials. Numerical simulations were conducted to analyze changes in the transient temperature field and thermal stress field during the thermal shock process. TiB2‒B4C composite ceramic tool materials were fabricated using discharge plasma sintering technology. With different B4C contents, different sintering temperatures and holding times as study variables, optimization of the sintering process parameters and ceramic material components was achieved through testing the mechanical and microscopic morphology of the ceramics. Thermal shock water quenching experiments were performed, and the strength‐decay method was employed to assess the thermal shock resistance of TiB2‒B4C ceramics. The findings indicate that the optimal sintering conditions are temperature of 1700°C and holding time of 5 min. The TiB2‒B4C ceramic material containing 20 vol% B4C exhibits superior comprehensive mechanical properties and thermal shock resistance, and its relative density, fracture toughness, hardness, and flexural strength were 99.3%, 6.8 MPa m1/2, 22.8 GPa, and 598 MPa, respectively. The critical thermal shock temperature difference falls within the range of 400°C‒500°C.

Investigation of Mechanical Property and Thermal Shock Behavior of Machinable B4C/BN Ceramics Composites

Investigation of mechanical property and thermal shock behavior of machinable B4C/BN ceramics composites

An investigation of the mechanical property and thermal shock behavior of machinable B4C/BN ceramic composites

FABRICATION AND THERMAL SHOCK RESISTANCE OF THE MACHINABLE BN/B4C COMPOSITE CERAMICS

Fabrication and properties of the machinable B4C/BN composites ceramics

Mechanical property and R-curve behavior of the B4C/BN ceramics composites

Property and Microstructure of Machinable B4C/BN Nanocomposites

Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing process

Thermal Shock Resistance Behavior of Machinable Al2O3/BN Nanocomposites

Investigation of Microstructure and Machinable Mechanism of the B4c/Bn Composites Fabricated by Hot-Pressing Process

Machinable Al2O3/BN Composite Ceramics with Strong Mechanical Properties

Fabrication and Characterization of B4C-based Ceramic Composites with Different Mass Fractions of Hexagonal Boron Nitride

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

High Temperature Oxidation Behavior of the B4c/Bn Composites

Investigation of Fabrication and Properties of Machinable Si3N4/BN Nanocomposite Ceramics

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Investigation of fabrication and properties of machinable Si3N4/BN composite ceramics

Fabrication and Properties of Machinable SiC/h-BN Nano-composites

Mechanical properties and thermal shock resistance of TiB2‒B4C composite ceramic tool materials at microscopic scale

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing