Abstract:The B4C/BN composites were fabricated by hot-pressing process. The B4C/BN composites included the B4C/BN microcomposites and the B4C/BN nanocomposites. The B4C/BN microcomposites were fabricated by hot-pressing process, and the B4C/BN nanocomposites were fabricated by chemical reaction and hot-pressing process. In this research, the phase composition, microstructure, machinability and machinable mechanism of the B4C/BN microcomposites and the B4C/BN nanocomposites were investigated. The microstructure of the B4C/BN composites was investigated by SEM and TEM. The SEM micrographs showed that the B4C/BN microcomposites and the B4C/BN nanocomposites exhibited the homogenous and compact microstructure, and the h-BN particles were homogenously distributed in the B4C matrix. The TEM micrographs of the B4C/BN composites showed that there existed the weak interface between B4C matrix grains and h-BN particles as well as the microcracks within the laminate structured h-BN particles. The machinability of the B4C/BN microcomposites and the B4C/BN nanocomposites increased gradually with the increase of h-BN content. The drilling rates and materials removal rates of the B4C/BN composites increased gradually with the increase of h-BN content. The surface roughness of drilled specimens of the B4C/BN composites decreased gradually with the increase of h-BN content. The relationship between the microstructure and machinable mechanism of the B4C/BN composites was analyzed and discussed. The phase composition and microstructure of drilled debris of drilled specimens of the B4C/BN composites were investigated by XRD and TEM. The microstructure of drilled surface of drilled specimens of the B4C/BN composites was observed and analyzed by SEM.

Mechanical property and R-curve behavior of the B4C/BN ceramics composites

An investigation of the mechanical property and thermal shock behavior of machinable B4C/BN ceramic composites

Investigation of Mechanical Property and Thermal Shock Behavior of Machinable B4C/BN Ceramics Composites

Property and Microstructure of Machinable B4C/BN Nanocomposites

Fabrication and properties of the machinable B4C/BN composites ceramics

FABRICATION AND THERMAL SHOCK RESISTANCE OF THE MACHINABLE BN/B4C COMPOSITE CERAMICS

Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing process

Investigation of Microstructure and Machinable Mechanism of the B4c/Bn Composites Fabricated by Hot-Pressing Process

Fabrication and Characterization of B4C-based Ceramic Composites with Different Mass Fractions of Hexagonal Boron Nitride

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

High Temperature Oxidation Behavior of the B4c/Bn Composites

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Preparation and mechanical properties of laminated B4C–TiB2/BN ceramics

Hard and tough ultrafine-grained B4C-cBN composites prepared by high-pressure sintering

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Wear Resistance of Silicon Infiltrated B4C/BN Composites

R-Curve Behavior of Machinable Sic/H-Bn Nano-Composites

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

Investigation of Phase Composition and Microstructure Characterization of the B<sub>4</sub>C/BN Composites Fabricated by Hot-Pressing Process

Mechanical and wear properties of h-BN/Si3N4 ceramic composites