Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite

Tailoring the Enhanced Mechanical Behavior of 6061al Composites Via Nano SiCp and Micron B4Cp Addition

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Microstructure and enhanced mechanical properties of hybrid-sized B4C particle-reinforced 6061Al matrix composites

Effect of High Volume Fraction of B4C Particles on the Microstructure and Mechanical Properties of Aluminum Alloy Based Composites

Microstructure and Mechanical Properties of B4C/6061Al Nanocomposites Fabricated by Advanced Powder Metallurgy

Regulating the Mechanical Properties of (μm B4C+nm SiC)/7075Al Composites Via Nano-Sic Content

Fabrication and Characterization of Hybrid Structured Al Alloy Matrix Composites Reinforced by High Volume Fraction of B4C Particles

Microstructure and mechanical properties of high content B4C-aluminium composites fabricated by hot-pressing sintering

Improving the Mechanical Properties of B4C/Al Composites by Solid-State Interfacial Reaction

Synthesis and Characterization of Al–B4C Powders by Mechanical Alloying

Effect of B4C Particle Size on the Mechanical Properties of B4C Reinforced Aluminum Matrix Layered Composite

Strengthened High-Temperature Resistance in B4C/SiC/2024Al Composite Via SiC Nanowires Pinning Grain Boundary

Mechanical Behavior and Interfacial Micro-Zones of SiCp(CNT) Hybrid Reinforced Aluminum Matrix Composites

Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route

Enhanced Mechanical Behavior and Fabrication of Silicon Carbide Particles Covered by In-Situ Carbon Nanotube Reinforced 6061 Aluminum Matrix Composites

Effect of B4C Granulometric Composition on Microstructure and Mechanical Properties of B4C-Al Composites

Enhanced Mechanical Properties of Nanocrystalline B4C–SiC Composites by In-Situ High Pressure Reactive Sintering

Influence of the Reinforcement Phase Composition on the Structure and Abrasive Wear Resistance of Aluminum Matrix Composites Reinforced with B4C and SiC