Abstract:The health monitoring of bridge under moving vehicles demands a high-efficient time-varying characteristic analysis method to extract the frequency fluctuations caused by vehicle-bridge dynamic interaction effect. Characteristics identification of structures becomes a challenging task especially when time-varying vibration modes are involved. For this purpose, an instantaneous frequency identification technique based on modified S-transform reassignment is presented in this paper. Firstly, the general approximation between structural instantaneous frequency and S-transform is deduced. The Gaussian window is employed in S-transform and a novel first-order frequency function with two parameters is added into the Gaussian window function to improve the time–frequency resolution. The added function makes the Gaussian window scalable-sliding and the optimal values of the parameters are selected based on time–frequency concentration criterion. Considering the Rényi entropy as the measurement of criterion, the information performance extracted from S-transform spectrogram is evaluated. Then the time–frequency reassignment technique is applied to improve the readability of S-transform spectrogram to assure the accuracy of the extracted instantaneous characteristics, which enhances the time–frequency concentration efficiently. The proposed method is verified by numerical simulation, the results obtained by the spectrograms derived from short-time Fourier transform, wavelet transform, modified S-transform and reassigned modified S-transform are compared. Afterwards, the time-varying frequency components related to the vehicle-bridge interaction are extracted from the response signal. Numerical simulations involving different parameter analysis and laboratory experiments are conducted to validate the flexibility of the technique in vehicle-bridge system. The effect of vehicle weight, speed and road surface roughness on the identified results are discussed. Both numerical and experimental results have demonstrated that a higher time–frequency concentration in the spectrogram can be observed of the proposed modified S-transform reassignment method than other time–frequency methods, and subsequently a higher accuracy of instantaneous frequency identification is achieved which provides a good tool for time-varying characteristic analysis in bridge health monitoring.

Contact Residue for Simultaneous Removal of Vehicle’s Frequency and Surface Roughness in Scanning Bridge Frequencies Using Two Connected Vehicles

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Using vehicle–bridge contact spectra and residue to scan bridge's modal properties with vehicle frequencies and road roughness eliminated

Scanning torsional-flexural frequencies of thin-walled box girders with rough surface from vehicles’ residual contact response: Theoretical study

Theoretical analysis of low-frequency noise radiated from bridge vibrations

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

Novel recursive formula for removing damping distortion effect on bridge mode shape restoration using a two-axle scanning vehicle

Response Spectrum-Based Method for Calculating the Reaction Force of Piers Subjected to Truck Collisions

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Subspace Identification of Bridge Frequencies Based on the Dimensionless Response of a Two-Axle Vehicle

Furthering extraction of torsional–flexural frequencies for thin-wall beams from the rocking motion of a two-wheel test vehicle

Effect of damping on torsional-flexural frequencies of monosymmetric thin-walled beams scanned by moving vehicles

A vehicle-bridge interaction model considering contact patch size and vehicle self-generated excitation – A theoretical study

Review of Vehicle Scanning Method for Bridges from 2004 to 2024

Effect of Damping on the Identification of Bridge Properties Using Vehicle Scanning Methods

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

Vehicle-SFT-current Coupling Vibration of Multi-Span Submerged Floating Tunnel, Part I: Mode Superposition and Galerkin Hybrid Method

Improved Vehicle Scanning Method for Bridge Damage Detection

Time-varying characteristics analysis of vehicle-bridge interaction system based on modified S-transform reassignment technique

Theoretical study on a dual-beam model for detection of track/bridge frequencies and track modulus by a moving vehicle