Abstract:In bridge structural health monitoring, typically the dynamic response of the system is used to assess the health condition of the bridge. However, the dynamic interaction between a bridge and a passing vehicle imposes non-stationarity on the system response, whereby the bridge modal parameters become time-dependent and detecting damage, for example, based on the bridge modal parameters, becomes challenging. Dynamic vehicle-bridge interaction (VBI) responses have mainly been investigated for damage detection through identifying signal singularities and abrupt changes. The singularities are usually associated with high-frequency components (relative to the bridge natural frequencies), and it is demanding to isolate the damage-induced singularities from those caused by either an operational condition, i.e., track irregularities, or noise. Unlike the high-frequency range, the influence of damage on the resonance frequency of the coupled system has not been fully explored. The present study proposes the shape of the bridge instantaneous frequency as a damage sensitive feature in which the influence of the vehicle dynamics can be excluded. This study demonstrates the feasibility of a damage detection approach based on the bridge instantaneous frequency by applying Wavelet Synchrosqueezed Transform (WSST). In this approach the bridge instantaneous frequency variation induced by damage is distinguished from the bridge instantaneous frequency variation induced by the vehicle. Several damage scenarios that are implemented numerically are analyzed to verify the method’s performance. The results demonstrate that a high resolution instantaneous frequency extracted from the VBI dynamic response outperforms the resonance frequency in determining the local disruption, leading to detecting the damage. A Damage Index (DI) is also proposed as an attempt to quantify the damage severity.

Improved Vehicle Scanning Method for Bridge Damage Detection

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

Drive-by bridge damage detection using Mel-frequency cepstral coefficients and support vector machine

Review of Vehicle Scanning Method for Bridges from 2004 to 2024

On the Tapping-Scan Method Designed for the Damage Detection of Bridge Structures

Bridge damage identification based on synchronous statistical moment theory of vehicle–bridge interaction

Novel recursive formula for removing damping distortion effect on bridge mode shape restoration using a two-axle scanning vehicle

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System

Application of variational mode decomposition in vibration-based bridge damage detection

The tap-scan method for damage detection of bridge structures

Damage Detection in Bridge Structure Using Vibration Data under Random Travelling Vehicle Loads

Bridge damage identification with improved HHT and PSD sensitivity method based on vehicle response

Railway bridge damage detection based on extraction of instantaneous frequency by Wavelet Synchrosqueezed Transform

Vibration-Based Damage Detection Of Cable-Stayed Bridges

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Research on damage identification of simply supported bridge based on effect size method for vehicle-bridge coupled vibration

Damage Detection of Continuous Beam Bridge Based on Maximum Successful Approximation Approach of Wavelet Coefficients of Vehicle Response

Damage Identification Method for Medium- and Small-Span Bridges Based on Macro-Strain Data under Vehicle-Bridge Coupling