Abstract:The normal vector of migration direction in the solid-liquid interface of dendrites was used to describe the phase-field governing equation. By using the three angles formed by the normal vector for the migration direction of the dendritic growth interface and the coordinate axes of the simulation region, the authors expressed the interfacial anisotropy equation, and built a phase-field model for the competitive growth of multiple grains. Taking a Al-2%mole-Cu binary alloy as an example, the competitive growth of multiple grains during isothermal solidification was simulated by applying parallel computing techniques. In addition, the phase field simulation results were verified by the experimental method. The simulation results show that the competitive growth of equiaxed dendrite is divided into two types: the first occurs during the process of competitive growth, the tips of primary dendrite on different grains taking part in the competition stop growing in their optimal growth direction; the second also occurs during competitive growth, the tips of primary dendrite which participate in the competition on different grains never stop growing in their optimal growth direction. The dendritic morphologies of the first competition growth type are divided into two types. Primary dendrites of grains taking part in the competition stop growing in their optimal growth direction and the competition plane enlarges when neither one wins the competition. However, when one wins the competition, the primary dendrites of grains with superiority go through the blocking grains and continue to grow in their optimal growth direction. The primary dendrites of inferior grains stop growing in their optimal growth direction and then instead grow in those areas without obstacles. The dendritic morphology of the second competition-growth type is shown to be the deformation of primary dendrites, which are mainly represented as the deflection and bending observed from different views. Compared with the metallographic picture, the simulation results can show the morphology of the competitive growth in all directions, so this simulation method can better characterize the competitive growth process.

Coarse Columnar Dendrites of GH3039 Nickel-Based Alloy at Diverging Grain Boundaries During Wire and Laser Additive Manufacturing: A Phase Field Simulation

Analysis of Tilted Columnar Dendrites at Grain Boundaries During Wire and Laser Additive Manufacturing: a Phase-Field Study

COLUMNAR DENDRITE MORPHOLOGY AND SOLUTE CONCENTRATION OF GH3039 NICKEL-BASED SUPERALLOYS DURING WIRE AND LASER ADDITIVE MANUFACTURING: INSIGHTS FROM PHASE FIELD SIMULATIONS

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Phase Field Study of Spacing Evolution During Wire and Laser Additive Manufacturing under Transient Conditions

Phase-Field Simulation Studies of Multiple Grains Coupled with Force Flow Field

Numerical Simulation of Dendrite Growth in Ni-based Superalloy Casting During Directional Solidification Process

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Phase-field Model of Dendrite Growth of Multicomponent Alloy with Multiple Grains

Dendrite Morphology And Growth Orientation Of Magnesium Alloys: Simulation By Phase-Field And 3-D Characterization By Synchrotron X-Ray Tomography

Phase-field Modeling of Free Dendritic Growth in Binary Alloy under Forced Flow

Effect of dendrite arrays near grain boundary on the competitive growth of converging Ni-based bi-crystal superalloys

Phase-field simulation of microstructure evolution in electron beam additive manufacturing

Large‐scale simulation of dendrite growth in directional solidification castings

Numerical Simulation of Dendrite Growth in Nickel-Based Superalloy and Validated by In-Situ Observation Using High Temperature Confocal Laser Scanning Microscopy

Phase-field simulation of the dendrite growth in aluminum alloy AA5754 during alternating current electromagnetic stirring laser beam welding

Dendrite deformation in the rejoined platforms of Ni‐based single crystal superalloys

A multi-grid Cellular Automaton model for simulating dendrite growth and its application in additive manufacturing

Effect of laser deposition connecting angle on microstructure and tensile properties of GH4169 alloy