Abstract:As a typical hexagonal close-packed structure metal, the dendritic morphology and preferential orientation of Mg would be influenced by many factors. Current investigations still fall short on the thorough description of the diversity and complexity of dendrites growth patterns and their origination, therefore, this paper reviewed recent research progress of this group on 3D characterization of microstructure in solidified magnesium alloys. Using synchrotron X-ray tomography and phase-field modeling, the formation mechanism of the diverse alpha-Mg (X) dendrites and the affections of alloying element (such as Al, Ca, Zn, and Sn), solute concentration on the growth selection and evolution of alpha-Mg dendrites during solidification were studied. The results indicate that the alloying elements and solute concentration would impose a significant influence on the morphology and orientation selection of the primary alpha-Mg dendrites. In Mg-Ca and Mg-Al (hcp-fcc) alloys, dendrites tend to grow with preferred orientation of <11<(2)over bar>0> or <22<(4)over bar>5> which is in good agreement with the traditional expected direction. The equiaxed growth dendrites in Mg-Sn (hcp-bct) alloys evolve as a structure with 18 branches, six of which grow on the basal plane along <11<(2)over bar>0> and the remaining 12 along <11<(2)over bar>X> (X approximate to 2) off the basal plane. For the case in Mg-Zn alloys, an orientation transition from <11<(2)over bar>0> on the basal plane to <11<(2)over bar>1> off the basal plane are observed with the increasing addition of Zn alloying element, a hyperbranched seaweed structure is also revealed with an interim composition. A probable explanation is that the addition of high anisotropy Zn would slightly alter the anisotropy of interfacial free energy in front of the growth interface which results in a dendrite orientation transition (DOT). These findings partially reveal the underlying formation mechanism and origination of the diversity dendritic morphologies and branching structures of alpha-Mg dendrites in Mg alloys. Furthermore, with the fast X-ray imaging facility, in situ observations of the 3D microstructure evolution in Mg alloys during solidification are also carried out and the evolution of alpha-Mg dendrites are obtained for further analysis.

Dendrite Morphology And Growth Orientation Of Magnesium Alloys: Simulation By Phase-Field And 3-D Characterization By Synchrotron X-Ray Tomography

Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling

RESEARCH PROGRESS ON 3D DENDRITE MORPHOLOGY AND ORIENTATION SELECTION DURING THE SOLIDIFICATION OF Mg ALLOYS: 3D EXPERIMENTAL CHARACTERIZATION AND PHASE FIELD MODELING

Growth Orientations and Morphologies of Α-Mg Dendrites in Mg–Zn Alloys

Growth Pattern and Orientation Selection of Magnesium Alloy Dendrite: from 3-D Experimental Characterization to Theoretical Atomistic Simulation

Multiscale Simulation of alpha-Mg Dendrite Growth via 3D Phase Field Modeling and Ab Initio First Principle Calculations

Multiscale simulation of α Mg dendrite growth via 3D phase field modeling and Ab initio first principle calculations

Dendritic Growth in Mg-Based Alloys: Phase-Field Simulations and Experimental Verification by X-ray Synchrotron Tomography

Effect of Different Solute Additions on Dendrite Morphology and Orientation Selection in Cast Binary Magnesium Alloys

Mechanism Of The Growth Pattern Formation And Three-Dimensional Morphological Transition Of Hcp Magnesium Alloy Dendrite

Phase-field simulation for anisotropic dendrite growth in Mg-3wt.%Zn alloy

Atomistic Underpinnings for Growth Direction and Pattern Formation of Hcp Magnesium Alloy Dendrite

Three-dimensional Α-Mg Dendritic Morphology and Branching Structure Transition in Mg-Zn Alloys

Experiments and Modeling of Three-Dimensional Dendritic Morphology of Magnesium Alloy

Anomalous Α -Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy

Three-Dimensional Dendritic Morphology and Branching Mechanism in Directionally Solidified Mg-Zn Alloy

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Characterisation of three-dimensional dendritic morphology and orientation selection of α-Mg in Mg–Ca alloy using synchrotron X-ray tomography

Dendritic morphology of α-Mg during the solidification of Mg-based alloys: 3D experimental characterization by X-ray synchrotron tomography and phase-field simulations

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Correlation between crystallographic anisotropy and dendritic orientation selection of binary magnesium alloys