Abstract:As a typical hexagonal close-packed structure metal, the dendritic morphology and preferential orientation of Mg would be influenced by many factors. Current investigations still fall short on the thorough description of the diversity and complexity of dendrites growth patterns and their origination, therefore, this paper reviewed recent research progress of this group on 3D characterization of microstructure in solidified magnesium alloys. Using synchrotron X-ray tomography and phase-field modeling, the formation mechanism of the diverse alpha-Mg (X) dendrites and the affections of alloying element (such as Al, Ca, Zn, and Sn), solute concentration on the growth selection and evolution of alpha-Mg dendrites during solidification were studied. The results indicate that the alloying elements and solute concentration would impose a significant influence on the morphology and orientation selection of the primary alpha-Mg dendrites. In Mg-Ca and Mg-Al (hcp-fcc) alloys, dendrites tend to grow with preferred orientation of <11<(2)over bar>0> or <22<(4)over bar>5> which is in good agreement with the traditional expected direction. The equiaxed growth dendrites in Mg-Sn (hcp-bct) alloys evolve as a structure with 18 branches, six of which grow on the basal plane along <11<(2)over bar>0> and the remaining 12 along <11<(2)over bar>X> (X approximate to 2) off the basal plane. For the case in Mg-Zn alloys, an orientation transition from <11<(2)over bar>0> on the basal plane to <11<(2)over bar>1> off the basal plane are observed with the increasing addition of Zn alloying element, a hyperbranched seaweed structure is also revealed with an interim composition. A probable explanation is that the addition of high anisotropy Zn would slightly alter the anisotropy of interfacial free energy in front of the growth interface which results in a dendrite orientation transition (DOT). These findings partially reveal the underlying formation mechanism and origination of the diversity dendritic morphologies and branching structures of alpha-Mg dendrites in Mg alloys. Furthermore, with the fast X-ray imaging facility, in situ observations of the 3D microstructure evolution in Mg alloys during solidification are also carried out and the evolution of alpha-Mg dendrites are obtained for further analysis.

Phase-field simulation for anisotropic dendrite growth in Mg-3wt.%Zn alloy

Influence of Anisotropy on Dendritic Growth in Binary Alloy with Phase–Field Simulation

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Thermal and Solute Diffusion During Dendrite Growth of Mg-5wt.%Zn Alloy

Dendrite Morphology And Growth Orientation Of Magnesium Alloys: Simulation By Phase-Field And 3-D Characterization By Synchrotron X-Ray Tomography

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: A phase field study

Phase-field Simulations of Dendrite Morphologies and Selected Evolution of Primary Α-Mg Phases During the Solidification of Mg-rich Mg–Al-based Alloys

RESEARCH PROGRESS ON 3D DENDRITE MORPHOLOGY AND ORIENTATION SELECTION DURING THE SOLIDIFICATION OF Mg ALLOYS: 3D EXPERIMENTAL CHARACTERIZATION AND PHASE FIELD MODELING

Phase-Field Lattice-Boltzmann Study for α-Mg Dendrite Growth of Mg-5wt%Zn Alloy with Forced Convection

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process

Dendritic Growth in Mg-Based Alloys: Phase-Field Simulations and Experimental Verification by X-ray Synchrotron Tomography

Multiscale simulation of α Mg dendrite growth via 3D phase field modeling and Ab initio first principle calculations

Simulation of Atypical Dendrite Growth in Ni–Cu Binary Alloy with Phase-Field Method

Thermal and solute diffusion in α-Mg dendrite growth of Mg-5wt.%Zn alloy

Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Phase-field Simulation of Isothermal Solidification of Ternary Alloy Based on KKS Model

The growth direction selection of inclined dendrites induced by solute interaction: A phase-field study