Abstract:As a typical hexagonal close-packed structure metal, the dendritic morphology and preferential orientation of Mg would be influenced by many factors. Current investigations still fall short on the thorough description of the diversity and complexity of dendrites growth patterns and their origination, therefore, this paper reviewed recent research progress of this group on 3D characterization of microstructure in solidified magnesium alloys. Using synchrotron X-ray tomography and phase-field modeling, the formation mechanism of the diverse alpha-Mg (X) dendrites and the affections of alloying element (such as Al, Ca, Zn, and Sn), solute concentration on the growth selection and evolution of alpha-Mg dendrites during solidification were studied. The results indicate that the alloying elements and solute concentration would impose a significant influence on the morphology and orientation selection of the primary alpha-Mg dendrites. In Mg-Ca and Mg-Al (hcp-fcc) alloys, dendrites tend to grow with preferred orientation of <11<(2)over bar>0> or <22<(4)over bar>5> which is in good agreement with the traditional expected direction. The equiaxed growth dendrites in Mg-Sn (hcp-bct) alloys evolve as a structure with 18 branches, six of which grow on the basal plane along <11<(2)over bar>0> and the remaining 12 along <11<(2)over bar>X> (X approximate to 2) off the basal plane. For the case in Mg-Zn alloys, an orientation transition from <11<(2)over bar>0> on the basal plane to <11<(2)over bar>1> off the basal plane are observed with the increasing addition of Zn alloying element, a hyperbranched seaweed structure is also revealed with an interim composition. A probable explanation is that the addition of high anisotropy Zn would slightly alter the anisotropy of interfacial free energy in front of the growth interface which results in a dendrite orientation transition (DOT). These findings partially reveal the underlying formation mechanism and origination of the diversity dendritic morphologies and branching structures of alpha-Mg dendrites in Mg alloys. Furthermore, with the fast X-ray imaging facility, in situ observations of the 3D microstructure evolution in Mg alloys during solidification are also carried out and the evolution of alpha-Mg dendrites are obtained for further analysis.

Thermal and Solute Diffusion During Dendrite Growth of Mg-5wt.%Zn Alloy

Thermal and solute diffusion in α-Mg dendrite growth of Mg-5wt.%Zn alloy

Phase-Field Lattice-Boltzmann Study for α-Mg Dendrite Growth of Mg-5wt%Zn Alloy with Forced Convection

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Dendrite Growth Kinetics Of Beta Zr Phase Within Highly Undercooled Liquid Zr-Si Hypoeutectic Alloys Under Electrostatic Levitation Condition

Dendritic Solidification of Highly Undercooled Dilute Alloys

Phase-field simulation for anisotropic dendrite growth in Mg-3wt.%Zn alloy

Dendritic Evolution During Coarsening of Mg-Zn Alloys Via 4D Synchrotron Tomography

Dendrite growth during rapid solidification of Co-Sb alloys

Phase-field modeling of free dendritic growth of magnesium based alloy

Solute Diffusion Controlled Dendritic Growth under High Undercooling Conditions

RESEARCH PROGRESS ON 3D DENDRITE MORPHOLOGY AND ORIENTATION SELECTION DURING THE SOLIDIFICATION OF Mg ALLOYS: 3D EXPERIMENTAL CHARACTERIZATION AND PHASE FIELD MODELING

Synchrotron Tomographic Quantification of the Influence of Zn Concentration on Dendritic Growth in Mg-Zn Alloys

Dendritic Growth under Natural and Forced Convection in Al-Cu Alloys: from Equiaxed to Columnar Dendrites and from 2D to 3D Phase-Field Simulations

Effect of Different Solute Additions on Dendrite Morphology and Orientation Selection in Cast Binary Magnesium Alloys

Three-Dimensional Dendritic Morphology and Branching Mechanism in Directionally Solidified Mg-Zn Alloy

Simulation of Primary Dendrite Competitive Growth and Solute Concentration Distribution in Directional Solidification DZ125 Superalloy

Diffusion-convection Effects on Constrained Dendritic Growth in Dilute Alloys

A three-dimensional cellular automaton model for dendritic growth in multi-component alloys

Effect of Solute Diffusion on Dendrite Growth in the Molten Pool of Al-Cu Alloy