Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Dendrite deformation in the rejoined platforms of Ni‐based single crystal superalloys

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy

Dendrite Morphology and Evolution Mechanism of Nickel-Based Single Crystal Superalloys Grown along the <001> and <011> Orientations

Effect of secondary orientation on the microstructures in thin-walled castings of nickel-based single-crystal superalloys

COLUMNAR DENDRITE MORPHOLOGY AND SOLUTE CONCENTRATION OF GH3039 NICKEL-BASED SUPERALLOYS DURING WIRE AND LASER ADDITIVE MANUFACTURING: INSIGHTS FROM PHASE FIELD SIMULATIONS

Effect of dendrite arrays near grain boundary on the competitive growth of converging Ni-based bi-crystal superalloys

Solute enrichment induced dendritic fragmentation in directional solidification of nickel-based superalloys

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Microstructure Development of Different Orientated Nickel-Base Single Crystal Superalloy in Directional Solidification

Dendrite Arm Spacings And Microsegrega Tions In < 001 > And < 011 > Orientated Single Crystal Superalloys Dd407

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy deposition

Numerical Simulation of Dendrite Growth in Ni-based Superalloy Casting During Directional Solidification Process

A 3D Analysis of Dendritic Solidification and Mosaicity in Ni-Based Single Crystal Superalloys

Coarse Columnar Dendrites of GH3039 Nickel-Based Alloy at Diverging Grain Boundaries During Wire and Laser Additive Manufacturing: A Phase Field Simulation

Analysis of Tilted Columnar Dendrites at Grain Boundaries During Wire and Laser Additive Manufacturing: a Phase-Field Study

Epitaxial laser deposition of single crystal Ni-based superalloys: Repair of complex geometry

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys