Abstract:Modern aero and power industry needs high-performance gas turbine. Directional solidification (DS) columnar grain and single crystal (SX) blade as key parts of gas turbine serve in heavy stress and high temperature conditions. The DS and SX blade are mainly produced by high rapid solidification (HRS) method, and HRS is one of useful DS technology, which has a property that the heat dissipating ways are changing during the process and the temperature gradients will vary correspondingly. The dendrite grain arrays were the substructure of a DS or SX blade. The structure of the dendrite grain arrays influences the mechanical property of the final casting very much, but is seriously affected by the solidification parameters, such as temperature gradient. In this work, the dendrite grain growth of DD6 superalloy was studied based on cellular automaton- finite difference (CA-FD) model concerning the HRS method's macro solidification parameters. Mathematic models for dendrite grain growth controlled by temperature field and solute field were built to describe the competitive growth and morphology evolution of dendrite grains. Then the dendrite calculation model was coupled with the models of DS process calculation, and some HRS solidification parameters were included, such as withdrawal rate, pouring temperature, etc. The coupled models were used to predict the dendrite grain competitive growth of DD6 superalloy during the DS process. The variation of solute distribution and the dynamic adjustment of dendritic spacing during the process could be predicted by simulating calculation. The DS experiment was carried out with a cylinder sample, and dendrite grains' distribution in the transverse and longitude section was observed by OM and SEM. Then the simulated dendritic morphology was compared with that by experiment. The primary and secondary dendritic spacing by experiment and simulation were measured, and the compared results revealed that as the DS process going on the temperature gradient decreased gradually and the primary dendritic spacing was increasing. So simulation results of the DS dendritic competitive growth were validated by the experiment results, and the proposed models could predict the dendrite grain morphology and the adjustments of DS dendritic spacing of DD6 superalloy very well.

Numerical Simulation of Dendrite Growth in Ni-based Superalloy Casting During Directional Solidification Process

Simulation of Dendritic Competitive Growth During Directional Solidification Using Modified Cellular Automaton Method

Large‐scale simulation of dendrite growth in directional solidification castings

Multi-scale Simulation of Directional Dendrites Growth in Superalloys

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Numerical Simulation of Dendrite Grain Growth of Dd6 Superalloy During Directional Solidification Process

Three-dimensional Numerical Simulation of Meso-Scale Dendritic Growth in Alloys

Numerical Simulation of Dendrite Growth of Aluminum Alloy

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Simulation of Nh4cl-H2o Dendritic Growth in Directional Solidification

Numerical Simulation of Dendrite Growth in Nickel-Based Superalloy and Validated by In-Situ Observation Using High Temperature Confocal Laser Scanning Microscopy

Simulation of Atypical Dendrite Growth in Ni–Cu Binary Alloy with Phase-Field Method

Numerical Simulation of Dendritic Growth During Directional Solidification Considering Peritectic Phase

Large-scale simulation of dendrite growth in directional solidification castings (Phys. Status Solidi B 10/2017)

Numerical Simulation and Experimental Casting of Nickel-Based Single-Crystal Superalloys by HRS and LMC Directional Solidification Processes

Simulation of the dendrite growth during directional solidification under steady magnetic field using three-dimensional cellular automaton method coupled with Eulerian multiphase