Abstract:Modern aero and power industry needs high-performance gas turbine. Directional solidification (DS) columnar grain and single crystal (SX) blade as key parts of gas turbine serve in heavy stress and high temperature conditions. The DS and SX blade are mainly produced by high rapid solidification (HRS) method, and HRS is one of useful DS technology, which has a property that the heat dissipating ways are changing during the process and the temperature gradients will vary correspondingly. The dendrite grain arrays were the substructure of a DS or SX blade. The structure of the dendrite grain arrays influences the mechanical property of the final casting very much, but is seriously affected by the solidification parameters, such as temperature gradient. In this work, the dendrite grain growth of DD6 superalloy was studied based on cellular automaton- finite difference (CA-FD) model concerning the HRS method's macro solidification parameters. Mathematic models for dendrite grain growth controlled by temperature field and solute field were built to describe the competitive growth and morphology evolution of dendrite grains. Then the dendrite calculation model was coupled with the models of DS process calculation, and some HRS solidification parameters were included, such as withdrawal rate, pouring temperature, etc. The coupled models were used to predict the dendrite grain competitive growth of DD6 superalloy during the DS process. The variation of solute distribution and the dynamic adjustment of dendritic spacing during the process could be predicted by simulating calculation. The DS experiment was carried out with a cylinder sample, and dendrite grains' distribution in the transverse and longitude section was observed by OM and SEM. Then the simulated dendritic morphology was compared with that by experiment. The primary and secondary dendritic spacing by experiment and simulation were measured, and the compared results revealed that as the DS process going on the temperature gradient decreased gradually and the primary dendritic spacing was increasing. So simulation results of the DS dendritic competitive growth were validated by the experiment results, and the proposed models could predict the dendrite grain morphology and the adjustments of DS dendritic spacing of DD6 superalloy very well.

Large‐scale simulation of dendrite growth in directional solidification castings

Large-scale simulation of dendrite growth in directional solidification castings (Phys. Status Solidi B 10/2017)

Multi-scale Simulation of Directional Dendrites Growth in Superalloys

Numerical Simulation of Dendrite Growth in Ni-based Superalloy Casting During Directional Solidification Process

Numerical Simulation of Dendrite Grain Growth of Dd6 Superalloy During Directional Solidification Process

Simulation of Dendritic Competitive Growth During Directional Solidification Using Modified Cellular Automaton Method

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Numerical Simulation of Dendrite Growth of Aluminum Alloy

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

A multi-grid Cellular Automaton model for simulating dendrite growth and its application in additive manufacturing

Simulation of Nh4cl-H2o Dendritic Growth in Directional Solidification

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Simulation of the dendrite growth during directional solidification under steady magnetic field using three-dimensional cellular automaton method coupled with Eulerian multiphase

Three-dimensional Numerical Simulation of Meso-Scale Dendritic Growth in Alloys

Dendrite Growth Modelling of Cast Magnesium Alloy

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

A Modified Cellular Automaton Model for the Quantitative Prediction of Equiaxed and Columnar Dendritic Growth

3D Modeling and Simulation of Dendritic Growth During Solidification

Modeling of dendrite growth for the cast magnesium alloy

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Phase-Field Simulation Studies of Multiple Grains Coupled with Force Flow Field