Abstract:As stacking technologies, such as 2.5D and 3D packages, continue to accelerate in advanced semiconductor components, the singulation and thinning of Si wafers are becoming increasingly critical. Despite their importance in producing thinner and more reliable Si chips, achieving high reliability remains a challenge, and comprehensive research on the effects of these processing techniques on Si chip integrity is lacking. In this study, the impacts of wafer thinning and singulation on the fracture strength of Si wafers were systematically compared. Three different grinding processes, namely fine grinding, poly-grinding, and polishing, were used for thinning, and the resulting surface morphology and roughness were analyzed using scanning electron microscopy and an interferometer. In addition, the residual mechanical stress on the wafer surface was measured using Raman spectroscopy. The fracture strength of Si wafers and chips was assessed through three-point bending tests. Singulation, including blade dicing, laser dicing, and stealth dicing, was evaluated for its impact on fracture strength. Among these processes, polishing for wafer thinning exhibited the lowest full-width half maximum and intensity ratio of Raman shifts (I480/I520), indicating minimal residual stress and surface defects. Consequently, Si wafers and chips processed through polishing demonstrated the highest fracture strength. Moreover, the 60 μm thick Si wafers and chips showed the highest fracture strength compared with those with thicknesses of 90 and 120 μm, possibly because of the increased flexibility, which mitigates stress. Among the singulation methods, stealth dicing yielded the highest fracture strength, outperforming blade and laser dicing. The combination of wafer thinning via polishing and singulation via stealth dicing presents an optimal solution for producing highly reliable Si chips for 2.5D and 3D packaging. These findings may be valuable in selecting optimal processing technologies for high-reliability Si chip production in industrial settings.

An experimental investigation of silicon wafer thinning by sequentially using constant-pressure diamond grinding and fixed-abrasive chemical mechanical polishing

Ductile deformation and subsurface damage evolution mechanism of silicon wafer induced by ultra-precision grinding process

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Subsurface Damage and Bending Strength Analysis for Ultra-Thin and Flexible Silicon Chips

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing

Study on Subsurface Damage of Wafer Silicon Containing Through Silicon Via in Thinning

Sub-surface Damage of Ultra-Thin Monocrystalline Silicon Wafer Induced by Dry Polishing

Surface Evolution and Stability Transition of Silicon Wafer Subjected to Nano-Diamond Grinding

Investigation of Material Removal Mechanism of Silicon Wafer in the Chemical Mechanical Polishing Process Using Molecular Dynamics Simulation Method

Si Characterization on Thinning and Singulation Processes for 2.5/3D HBM Package Integration

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing

Analysis of the high-efficiency and low-damage abrasive processing mechanism for SiC based on the SPH simulation of single-grain indentation and scratching

Cutting Speed Dependence of Material Removal Mechanism for Monocrystal Silicon

Copper Chemical Mechanical Polishing and Wafer Thinning with Temporary Bonding for Through Silicon Via Interconnect

Study on Preparation and Processing Properties of Mechano-Chemical Micro-Grinding Tools

Research on Silicon Wafer Surface Phase under the Ultra-thin Slicing Process and Its Etching Hindrance Behavior during Metal-Assisted Chemical Etching

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing

Surface Stress Evolution in Through Silicon Via Wafer During a Backside Thinning Process

Mechanical effect of abrasives on silicon surface in chemo-mechanical grinding

Non-contact grinding/thinning of silicon carbide wafer by pure EDM using a rotary cup wheel electrode