Abstract:This work introduces a stack layer of Lithium Phosphate (Li3PO4) /Titanium Dioxide (TiO2) as a new electron selective passivating contact for c‐Si solar cells. The stack achieves an impressive contact resistivity (ρc) of 0.128 mΩ cm2 on n‐type c‐Si substrates with resistivity ranging from 1 to 3 Ω cm2. Furthermore, it effectively reduces the surface recombination parameter (J0) to less than 4 fA by incorporating a 6 nm a‐Si:H(i) layer. Carrier selective contacts with passivation effects are considered to have a significant influence on the performance of crystalline silicon (c‐Si) solar cells. It is essential for electron selective contact materials to meet the requirements of ultra‐low contact resistance and excellent passivation effects. This work introduces a stack layer of Lithium Phosphate (Li3PO4) /Titanium Dioxide (TiO2) as a new electron selective passivating contact. It is found that the stack achieves an impressive contact resistivity (ρc) of 0.128 mΩ cm2 on n‐type c‐Si substrates with resistivity ranging from 1 to 3 Ω cm (14.6 mΩ cm2 for the n‐Si/a‐Si:H/Li3PO4/TiO2/Al contact). Furthermore, it effectively reduces the surface recombination parameter (J0) to less than 4 fA by incorporating a 6 nm a‐Si:H(i) layer. The characterization of the n‐Si/Li3PO4/TiO2 interface reveals that phosphorus diffusion into silicon plays a crucial role in achieving the ultra‐low contact resistivity, while the presence of PO43− groups helps in fixing hydrogen atoms to maintain the desired chemical passivation effect. Finally, a silicon heterojunction solar cell (SHJ) with a rear full‐area configuration of a‐Si:H/Li3PO4/TiO2/Al is successfully demonstrated achieving an impressive power conversion efficiency of 22.89%. The result proves the efficacy of employing hydrogen‐rich low‐work function metal oxide stacks as electron selective passivating contacts.

Transparent-Conductive-Oxide-Free Front Contacts for High Efficiency Silicon Heterojunction Solar Cells

Highly Efficient Silicon Heterojunction Solar Cells with ZnO:Al Transparent Electrode and Transition Metal Doped Indium Oxide Interfacial Layer

Modulation of the TCO/MoO x Front Contact Enables >21% High-Efficiency Dopant-Free Silicon Solar Cells

Improved electrical contact properties in Indium-free silicon heterojunction solar cells with amorphous SnO 2 TCO layers

Low-resistivity P-Type A-Si:H/azo Hole Contact in High-Efficiency Silicon Heterojunction Solar Cells

ZnO-Doped In<sub>2</sub>O<sub>3</sub> Front Transparent Contact Enables >24.0% Silicon Heterojunction Solar Cells

Status and Perspectives of Transparent Conductive Oxide Films for Silicon Heterojunction Solar Cells

Design and Optimization of SiOx/AZO Transparent Passivating Contacts for High‐Efficiency Crystalline Silicon Solar Cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Effective utilization of light by transparent conducting oxide layer to enhance the performance of the silicon heterojunction solar cells

ZnO‐doped In2O3 front transparent contact enables >24.0% silicon heterojunction solar cells

Transparent Conductive Oxide Sputtering Damage on Contact Passivation in Silicon Heterojunction Solar Cells with Hydrogenated Nanocrystalline Silicon

Application of Indium Tin Oxide/Aluminum-Doped Zinc Oxide Transparent Conductive Oxide Stack Films in Silicon Heterojunction Solar Cells

A silicon carbide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 24%

Bifacial silicon heterojunction solar cells using transparent‐conductive‐oxide‐ and dopant‐free electron‐selective contacts

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Conductive Passivator for Efficient Monolithic Perovskite/Silicon Tandem Solar Cell on Commercially Textured Silicon

Optimized Metallization for Interdigitated Back Contact Silicon Heterojunction Solar Cells

Heterojunction and Passivated Contacts: A Simple Method to Extract Both n/tco and p/tco Contacts Resistivity

Low‐Cost Tin Oxide Transparent Conductive Films for Silicon Heterojunction Solar Cells

A silicon oxide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 23%