Abstract:PurposeThe micro-vibrations of some flexible appendages onboard satellite such as reaction wheels, scanning mechanisms etc, will severely influenced the optical precision of the imager. To guarantee the imager orientation accuracy of high resolution satellite, this study focused on designing an isolation system to attenuate the influences of on orbit micro-vibration.MethodsStwart configuration is employed to construct the reaction wheel isolation system which contains six single isolators. A launch environment damper is designed to guarantee the structure safety of isolators without lock mechanisms at launching term which simplify the whole isolation system. The imager isolation system is composed of three special springs which are placed between imager basement and roof board of the satellite to isolate the disturbances to the imager. Both isolation systems are compose together for the satellite to attenuate the influences of on orbit micro-vibration.ResultsExperiments are designed to validate the productivity of the micro-vibration isolation system both in component and satellite level. The sine vibration experiment results show that the maximal acceleration output 34.61g is much lower than the flywheel design value 49g which guarantees the safety of flywheel under harsh launch environment. The experiment results in satellite level show that the vibration output in three directions changes smoothly and the imager orientation accuracy is 10.89urad (3σdocumentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$3sigma$$end{document}) which is suitable for the requirement of the imager onboard the SDLT-1 satellite.ConclusionThe proposed method has been applied to the SDLT-1 satellite and the experiment results in component and satellite level show the feasibility of the method. Some satellite with rigorous micro-vibration requirement could employ the proposed method of this study.

Separated Active Vibration Isolation Technology for Ultra-Quiet Scientific Satellites

Research on Passive Isolation Characteristics and Rocket-spacecraft Coupling of a New Whole-spacecraft Isolation Platform

Hybrid Passive/Active Vibration Control of a Loosely Connected Spacecraft System

Design and Verify of the Micro-vibration Isolation System for a Space-born High Sensitivity Optical Payload

Post-capture Vibration Suppression of Spacecraft Via a Bio-Inspired Isolation System

Dynamic characteristic of vibration isolation platform of control moment gyroscopes on satellites

Dual-stage Vibration Isolation of Optical Payloads for Satellites

Design and Simulation of an Active Vibration Isolator Based on Pneumatic-Electromagnetic Hybrid Driving

Study of Whole-Satellite Active Vibration Isolation Platform

Study on Micro-vibration Isolation System Design and Validation for the SDLT-1 Satellite of China

Vibration control of flexible satellites using a new isolator

Vibration isolation platform for control moment gyroscopes on satellites

Research on Micro-Vibration Control and Testing of FY-4 Meteorological Satellite

High frequency vibration isolation of control moment gyroscope on satellites

Micro-vibration control of spaceborne payload with smart parallel struts

High Frequency Vibration Isolation of CMG for Satellite

Dynamic Analysis and Control Application of Vibration Isolation System with Magnetic Suspension on Satellites

Decoupling design and control of a spaceborne ultra–stable platform for vibration isolation and precise steering

Vibration suppression for post-capture spacecraft via a novel bio-inspired Stewart isolation system

Experimental Demonstration of 1.5hz Passive Isolation System for Precision Optical Payloads

Active Vibration Suppression of Payloads with a Conical Isolator