Abstract:PurposeThe micro-vibrations of some flexible appendages onboard satellite such as reaction wheels, scanning mechanisms etc, will severely influenced the optical precision of the imager. To guarantee the imager orientation accuracy of high resolution satellite, this study focused on designing an isolation system to attenuate the influences of on orbit micro-vibration.MethodsStwart configuration is employed to construct the reaction wheel isolation system which contains six single isolators. A launch environment damper is designed to guarantee the structure safety of isolators without lock mechanisms at launching term which simplify the whole isolation system. The imager isolation system is composed of three special springs which are placed between imager basement and roof board of the satellite to isolate the disturbances to the imager. Both isolation systems are compose together for the satellite to attenuate the influences of on orbit micro-vibration.ResultsExperiments are designed to validate the productivity of the micro-vibration isolation system both in component and satellite level. The sine vibration experiment results show that the maximal acceleration output 34.61g is much lower than the flywheel design value 49g which guarantees the safety of flywheel under harsh launch environment. The experiment results in satellite level show that the vibration output in three directions changes smoothly and the imager orientation accuracy is 10.89urad (3σdocumentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$3sigma$$end{document}) which is suitable for the requirement of the imager onboard the SDLT-1 satellite.ConclusionThe proposed method has been applied to the SDLT-1 satellite and the experiment results in component and satellite level show the feasibility of the method. Some satellite with rigorous micro-vibration requirement could employ the proposed method of this study.

Research on Micro-Vibration Control and Testing of FY-4 Meteorological Satellite

Design and Verify of the Micro-vibration Isolation System for a Space-born High Sensitivity Optical Payload

Study on Micro-vibration Isolation System Design and Validation for the SDLT-1 Satellite of China

Physical Simulation Experiment for Flexible Satellite Control with Vibration Information Feedback

Separated Active Vibration Isolation Technology for Ultra-Quiet Scientific Satellites

Micro-vibration control of spaceborne payload with smart parallel struts

Study and verification of micro-vibration test for a satellite

Advances in spacecraft micro-vibration suppression methods

The Development of Micro-Vibration for Satellite

Micro-vibration suppression and compensation techniques for in-orbit satellite: A review

Parallel Load-Bearing and Damping System Design and Test for Satellite Vibration Suppression

Vibration Suppression of Optical Payload Based on Parallel Manipulator

Experimental Research on Whole-Spacecraft Vibration Suppression

Design and experiment of dual micro-vibration isolation system for optical satellite flywheel

Effect of satellite micro-vibration on imaging quality for optic payload

Dynamic characteristic of vibration isolation platform of control moment gyroscopes on satellites

Exploration Of Magnetic Suspension Technology Used For Spacecraft Micro-Vibration Isolation

Vibration Isolation Platform with Multiple Tuned Mass Dampers for Reaction Wheel on Satellites

Flywheel micro-vibration characters of a high resolution optical satellite

Experimental Demonstration of 1.5hz Passive Isolation System for Precision Optical Payloads

Study on the Micro-vibration Suppression of a MnCu Spring Isolation Platform with Low Stiffness and High Damping