Abstract:PurposeThe micro-vibrations of some flexible appendages onboard satellite such as reaction wheels, scanning mechanisms etc, will severely influenced the optical precision of the imager. To guarantee the imager orientation accuracy of high resolution satellite, this study focused on designing an isolation system to attenuate the influences of on orbit micro-vibration.MethodsStwart configuration is employed to construct the reaction wheel isolation system which contains six single isolators. A launch environment damper is designed to guarantee the structure safety of isolators without lock mechanisms at launching term which simplify the whole isolation system. The imager isolation system is composed of three special springs which are placed between imager basement and roof board of the satellite to isolate the disturbances to the imager. Both isolation systems are compose together for the satellite to attenuate the influences of on orbit micro-vibration.ResultsExperiments are designed to validate the productivity of the micro-vibration isolation system both in component and satellite level. The sine vibration experiment results show that the maximal acceleration output 34.61g is much lower than the flywheel design value 49g which guarantees the safety of flywheel under harsh launch environment. The experiment results in satellite level show that the vibration output in three directions changes smoothly and the imager orientation accuracy is 10.89urad (3σdocumentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$3sigma$$end{document}) which is suitable for the requirement of the imager onboard the SDLT-1 satellite.ConclusionThe proposed method has been applied to the SDLT-1 satellite and the experiment results in component and satellite level show the feasibility of the method. Some satellite with rigorous micro-vibration requirement could employ the proposed method of this study.

High frequency vibration isolation of control moment gyroscope on satellites

High Frequency Vibration Isolation of CMG for Satellite

Vibration isolation platform for control moment gyroscopes on satellites

Dynamic characteristic of vibration isolation platform of control moment gyroscopes on satellites

Parameters design of vibration isolation platform for control moment gyroscopes

Influence of Flexible Solar Arrays on Vibration Isolation Platform of Control Moment Gyroscopes

Experimental modeling and optimization of single-gimbal CMG vibration isolator

Dual-stage Vibration Isolation of Optical Payloads for Satellites

Dynamic Analysis and Control Application of Vibration Isolation System with Magnetic Suspension on Satellites

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Study on Joint Vibration Attenuation of the Satellite Attitude Control Actuator Using a Vibration Isolator and Vibration Absorbers

Design and Dynamic Analysis of Micro-vibration Isolator for Single Gimbal Control Moment Gyro

Dynamic modeling and open-loop analysis of a control moment gyroscope considering the influence of a flexible vibration isolator

DYNAMIC ANALYSIS OF VIBRATION ISOLATION SYSTEM WITH MAGNETIC SUSPENSION ON SATELLITES

Separated Active Vibration Isolation Technology for Ultra-Quiet Scientific Satellites

Coupled Dynamic Analysis of A Single Gimbal Control Moment Gyro Cluster Integrated with an Isolation System

Benefit of Relaxation-Type Damping on the Performance of a Six-Degree-of-Freedom Microvibration Isolation Device for Control Moment Gyroscope

Design and Analysis of a Moment Control Unit for Agile Satellite with High Attitude Stability Requirement

Hybrid Passive/Active Vibration Control of a Loosely Connected Spacecraft System

Vibration control of flexible satellites using a new isolator

Study on Micro-vibration Isolation System Design and Validation for the SDLT-1 Satellite of China