Abstract:Despite ongoing challenges, ablative thermal protection systems are among the most promising methods for safeguarding spacecraft during re-entry thermal protection systems (TPS). A novel aluminium titanate (Al2TiO5/AT) and a highly efficient thermal barrier of coating (TB/TBCs) made from yttria-stabilized zirconia (YSZ), powder, but deposited using the plasma spray technique on polyacrylonitrile (PAN)-based carbon fiber fabric(C)-reinforced with resorcinol phenol formaldehyde resin (RF) composites (C-RF)) would be a potential candidate for TPS applications. This study investigates the composites with varying wt.% of AT that were developed, namely 0 wt.% (YSZ-C-RF), 1 wt.%, 3 wt.%, and 5 wt.% (YSZ-AT-C-RF) by utilizing a hot press moulding machine. Thermal stability and ablation performance of unmodified C-RF with modified YSZ-C-RF and YSZ-AT-C-RF composites are examined through thermogravimetric analysis (TGA) and oxyacetylene torch test/OAT (4.0 MW/m2 for 60 sec). Also, the phase composition and microstructure of the ablated surface are determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The TBC of YSZ has an obvious influence on the residual weight ratios at high temperatures in C-RF and also plays a positive role in increasing thermal stability under nitrogen atmosphere for enhancing ablation resistance concerning YSZ-C-RF. The mass and linear ablation rates (MAR and LAR) of the composites after modifying the surface by YSZ-coated particles are reduced by 82.98% and 15.65%, respectively. Similarly, the introduction of AT particles and TBC of YSZ results in evidence of improving the thermal stability and the ablation resistance in varying wt.% of YSZ-AT-C-RF composites. The primary optimum AT weight loading for enhancing ablation resistance in YSZ-C-RF composites is 1wt.%. The modification of 1wt.% AT particles and YSZ-Coated particles reduce MAR and LAR by 54.79% and 61.94%, respectively. This work offers a meaningful method to remarkably enhance the ablation performance of the modified C-RF and YSZ-AT-C-RF composites.

Study on the Ablation Resistance of Plasma Sprayed La2(Zr0·7Ce0.3)2O7/YSZ and La1·9Ca0·1(Zr0·7Ce0.3)1.9Cr0·1O6.9/YSZ Thermal Protection Coatings

Phase transitions and microstructure evolutions of in-situ YSZ-ZrC composite coating under long-time plasma torch ablation

The Microstructure and Property Evolution of LaYbZr2O7 Thermal Barrier Coatings

CMAS Corrosion Resistance of Plasma-Sprayed YSZ and Yb2O3-Y2O3-Co-Stabilized ZrO2 Coatings under 39–40 KW Spraying Power

Preparation and Flame Ablation Resistance of Al/Zn/Cu-Incorporated Yttria Partially Stabilized Zirconia Coating

Thermal shock performance and failure behavior of Zr6Ta2O17-8YSZ double-ceramic-layer thermal barrier coatings prepared by atmospheric plasma spraying

Thermal shock resistance and failure analysis of La2(Zr0.75Ce0.25)2O7-based TBCs produced by atmospheric plasma spraying

Investigating Hot corrosion, CMAS, and Thermal Shock Behaviour of Double-layer YSZ/La2Ce2O7 + YSZ Thermal Barrier Coatings

High-entropy thermal barrier coating of rare-earth zirconate: A case study on (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 prepared by atmospheric plasma spraying

Ablation behavior of sharp leading edge parts made of rare earth La-compound modified ZrB2 coated C/C composites

Study on the mechanism of ultra-high temperature ablation of ZrB2–SiC–TaSi2 coatings by low-pressure plasma spraying on the C/C composites

Phase and microstructure evolutions of in-situ ZrC composite coating under plasma torch ablation

Enhanced ablation resistance of ZrC–ZrO2 nanocomposite ceramic coating on TiAlNb medium-entropy alloy prepared by a novel strategy

Evolution of Microstructure, Thermophysical and Mechanical Properties and Wetting Behavior of Plasma-Sprayed Yb2O3 and Y2O3 Co-Stabilized ZrO2 Coatings During High-Temperature Exposure and CMAS Corrosion

Thermophysical properties and cyclic lifetime of plasma sprayed SrAl 12 O 19 for thermal barrier coating applications

Thermal stability and anti-ablation performance of plasma spray coated-YSZ on Al 2 TiO 5 modified novel ablative carbon-phenolic composites

Microstructure and properties of Al2O3-ZrO2-Y2O3 coatings during high temperature and thermal shock resistance

Thermal Properties of Plasma-Sprayed Multilayer Al₂O₃/Yttria-Stabilized Zirconia Coating

Anti-ablation Performance of Plasma Sprayed ZrB2/SiC Coatings on C/C Substrates and the Influence of a Chemical Vapor Deposited SiC Interlayer

Properties evaluation and failure behaviour of plasma sprayed Y4Hf3O12 for thermal barrier coating applications

Study on Thermal Shock Behavior of YSZ Abradable Sealing Coating Prepared by Mixed Solution Precursor Plasma Spraying