Abstract:Oxidative propane dehydrogenation using CO2 (CO2‐ODHP) is a potential alternative for propylene synthesis. In this study, bifunctional catalysts (V2O5, ZrO2, Cr2O3, and Ga2O3 doped H‐ZSM‐5) are synthesized through additive manufacturing for CO2‐ODHP. Characterization and correlation between the various characterizations and the catalytic results indicates that the direct 3D printing of metal oxides alongside H‐ZSM‐5 can considerably modify the surface properties and bulk oxide phase dispersion, thus leading to enhanced metal oxide reducibility and exceptional CO2‐ODHP performance. Among the metal monoliths, the mixed oxide sample with 5 wt% Cr, 10 wt% V, 10 wt% Zr, 10 wt% Ga and 65 wt% H‐ZSM‐5 displays the best activity, achieving ≈40% propane conversion, 95% propylene selectivity, and zero benzene/toluene/xylene production. Upon eliminating CO2, the catalyst monoliths all retain their long‐term stability; however, the propane conversions decrease by ≈3% and the propylene selectivities decreased by 5–15%. Nevertheless, all five samples examined here demonstrate exceptional catalytic activities and prolonged stabilities, which are attributed to the even distribution of surface acid sites produced by direct printing of the oxide and zeolite components. Overall, this study presents a novel way of manufacturing bifunctional structured catalysts that exhibit exceptional ODHP performance. The direct synthesis of bifunctional metal oxide/HZSM‐5 with high oxide loadings is reported via a novel direct 3D printing of insoluble oxide/ZSM‐5 inks through additive manufacturing method for CO2 reduction in tandem with propane dehydrogenation. By varying the metal component in the monoliths produced by this new method, these materials achieve nearly 100% propylene selectivity and zero benzene/toluene/xylene production, high conversion, and high stability in the oxidative dehydrogenation of propane using CO2.

Preparation of a High-Precision Gama-Al2O3 Structured Catalyst by DLP 3D Direct Printing for Hydrogen Production from Methanol

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Towards unconstrained catalyst shaping: high accuracy DLP printing of porous γ-Al2O3-based catalysts

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Tailored monolithic catalyst and reactor by direct photo-curing 3D printing for oxidative desulfurization of fuels

Direct Ink Writing of Hierarchical Porous SiC Ceramics As Catalyst Support for Hydrogen Production

Design and catalytic performance of Ni catalyst for CO 2 methanation based on DIW-3D printing

Stereolithography 3D printed monolithic catalyst for highly efficient oxidative desulfurization of fuels

Fabricating a Structured Single‐Atom Catalyst via High‐Resolution Photopolymerization 3D Printing

Carbon-Free H2 Production from Ammonia Decomposition over 3D-Printed Ni-Alloy Structures Activated with a Ru/Al2O3 Catalyst

Directed Stabilization by Air-Milling and Catalyzed Decomposition by Layered Titanium Carbide Toward Low-Temperature and High-Capacity Hydrogen Storage of Aluminum Hydride

A Novel Method of 3D Printing High‐Loaded Oxide/H‐ZSM‐5 Catalyst Monoliths for Carbon Dioxide Reduction in Tandem with Propane Dehydrogenation

Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique

3D Printing Technique Fortifies the Ultradeep Hydrodesulfurization Process of Diesel: A Journey of NiMo/Al2O3-MMT

Highly controlled structured catalysts for on-board methanol reforming

One-Pot Three-Dimensional Printing of a Hierarchical NiMo/Al 2 O 3 Monolithic Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

3D printed hierarchical spinel monolithic catalysts for highly efficient semi-hydrogenation of acetylene

Direct ink writing of Pd-Decorated Al2O3 ceramic based catalytic reduction continuous flow reactor

Preparation of high performance dense Al 2 O 3 ceramics by digital light processing 3D printing technology

Preparation of palladium-based catalyst by plasma-assisted atomic layer deposition and its applications in CO2 hydrogenation reduction