Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Quantitative Understanding of the Environmental Effect on B10 Copper Alloy Corrosion in Seawater

The Impact of Oxygen Availability on Steel Corrosion Considering the Self-Balance Between Anodic and Cathodic Corrosion Cells

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Multiscale characterization of seawater pipe erosion of B10 copper-nickel alloy welded joints

Characterization of Corrosion Products Formed on Q235 Carbon Steel and T2 Copper in the Antarctic Atmosphere

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Research on accelerated corrosion of 0Cr18Ni9 stainless steel in marine atmospheric environment of the South China Sea

Effect of Tropical Marine Atmospheric Environment on Corrosion Behaviour of the 7B04-T74 Aluminium Alloy

Insight to corrosion mechanism of 90/10 copper-nickel alloys under different sea depths

Optimization and Evaluation of Accelerated Corrosion Tests Based on Mechanism Equivalence Principles

Study on the Initial Atmospheric Corrosion Behavior of Copper in Chloride-Containing Environments

Pitting corrosion of 2A12 aluminum alloy long-scale specimen in simulated seawater splash zone, dynamic waterline zone and full immersion zone

Effect of sulphide in water on corrosion of copper alloys

Study on corrosion simulation and anti-corrosion of marine B10 seawater pipe system

Atmospheric Corrosion Behaviour of Pure Al 1060 in Tropical Marine Environment

Influence of the Dissolved Oxygen Concentration in Artificial Seawater on the Corrosion Behavior of Q235 Mild Steel

Synergistic Effect of the Total Acid Number, S, Cl, and H2O on the Corrosion of AISI 1020 in Acidic Environments

Corrosion behavior of the low alloy weathering steels coupled with stainless steel in simulated open atmosphere

Effect of ultraviolet light on the corrosion behavior of weathering steel in simulated marine atmospheric environment

Electrochemical Study on Corrosion Damage of 7B04 Aluminum Alloy/Anodic Film/Epoxy Coating System in Simulated Marine Atmospheric Environment